Luca, You need to add a FromHost element to your config which will receive packets from Linux, and a ToHost element that will deliver packets to Linux.
Cliff On Thu, Nov 19, 2009 at 10:10 AM, Luca Belforte < [email protected]> wrote: > I put here my click configuration > > I'm using click 1.7 because the 1.6 doesn't work with xorp > > // > // Generated by XORP FEA > // > > > // Shared IPv4 input path and routing table > > _xorp_ip4 :: Strip(14) > -> CheckIPHeader(INTERFACES 10.10.10.11/24 10.30.30.10/24) > -> _xorp_rt4 :: LinearIPLookup(10.10.10.11/32 2, 10.30.30.10/32 2); > > > // ARP responses are copied to each ARPQuerier and the host. > > _xorp_arpt :: Tee(3); > > > // Input and output paths for eth1 > > FromDevice(eth1, SNIFFER false) -> _xorp_c0 :: Classifier( > 12/0800, // [0] IPv4 packet > 12/0806 20/0001, // [1] ARP request > 12/0806 20/0002, // [2] ARP reply > 12/86dd 20/3aff 54/87, // [3] IPv6 ICMP ND solicitation > 12/86dd 20/3aff 54/88, // [4] IPv6 ICMP ND advertisment > 12/86dd, // [5] IPv6 packet > -) // [6] Unsupported protocol; > _xorp_out0 :: Queue(200) -> _xorp_to_device0 :: ToDevice(eth1); > > // IPv4 > _xorp_c0[0] -> Paint(1) -> _xorp_ip4; > _xorp_c0[1] -> ARPResponder(10.10.10.11 8:0:27:23:1a:29) -> _xorp_out0; > _xorp_arpq0 :: ARPQuerier(10.10.10.11, 8:0:27:23:1a:29) -> _xorp_out0; > _xorp_c0[2] -> _xorp_arpt; > _xorp_arpt[0] -> [1]_xorp_arpq0; > > // Discard IPv6 > _xorp_c0[5] -> Discard; > _xorp_c0[3] -> Discard; > _xorp_c0[4] -> Discard; > > // Unknown protocol > _xorp_c0[6] -> Print("eth1 unknown protocol") -> Discard; > > > // Input and output paths for eth2 > > FromDevice(eth2, SNIFFER false) -> _xorp_c1 :: Classifier( > 12/0800, // [0] IPv4 packet > 12/0806 20/0001, // [1] ARP request > 12/0806 20/0002, // [2] ARP reply > 12/86dd 20/3aff 54/87, // [3] IPv6 ICMP ND solicitation > 12/86dd 20/3aff 54/88, // [4] IPv6 ICMP ND advertisment > 12/86dd, // [5] IPv6 packet > -) // [6] Unsupported protocol; > _xorp_out1 :: Queue(200) -> _xorp_to_device1 :: ToDevice(eth2); > > // IPv4 > _xorp_c1[0] -> Paint(2) -> _xorp_ip4; > _xorp_c1[1] -> ARPResponder(10.30.30.10 8:0:27:2b:ed:3f) -> _xorp_out1; > _xorp_arpq1 :: ARPQuerier(10.30.30.10, 8:0:27:2b:ed:3f) -> _xorp_out1; > _xorp_c1[2] -> _xorp_arpt; > _xorp_arpt[1] -> [1]_xorp_arpq1; > > // Discard IPv6 > _xorp_c1[5] -> Discard; > _xorp_c1[3] -> Discard; > _xorp_c1[4] -> Discard; > > // Unknown protocol > _xorp_c1[6] -> Print("eth2 unknown protocol") -> Discard; > > > // Local delivery > > _xorp_toh :: Discard; > > // IPv4 > _xorp_rt4[2] -> EtherEncap(0x0800, 1:1:1:1:1:1, 2:2:2:2:2:2) -> > _xorp_toh; > _xorp_arpt[2] -> _xorp_toh; > > > // Forwarding path for eth1 > > // IPv4 > _xorp_rt4[0] -> DropBroadcasts > -> _xorp_cp0 :: PaintTee(1) > -> _xorp_gio0 :: IPGWOptions(10.10.10.11) > -> FixIPSrc(10.10.10.11) > -> _xorp_dt0 :: DecIPTTL > -> _xorp_fr0 :: IPFragmenter(1500) > -> [0]_xorp_arpq0; > _xorp_dt0[1] -> ICMPError(10.10.10.11, timeexceeded) -> _xorp_rt4; > _xorp_fr0[1] -> ICMPError(10.10.10.11, unreachable, needfrag) -> > _xorp_rt4; > _xorp_gio0[1] -> ICMPError(10.10.10.11, parameterproblem) -> _xorp_rt4; > _xorp_cp0[1] -> ICMPError(10.10.10.11, redirect, host) -> _xorp_rt4; > > > // Forwarding path for eth2 > > // IPv4 > _xorp_rt4[1] -> DropBroadcasts > -> _xorp_cp1 :: PaintTee(2) > -> _xorp_gio1 :: IPGWOptions(10.30.30.10) > -> FixIPSrc(10.30.30.10) > -> _xorp_dt1 :: DecIPTTL > -> _xorp_fr1 :: IPFragmenter(1500) > -> [0]_xorp_arpq1; > _xorp_dt1[1] -> ICMPError(10.30.30.10, timeexceeded) -> _xorp_rt4; > _xorp_fr1[1] -> ICMPError(10.30.30.10, unreachable, needfrag) -> > _xorp_rt4; > _xorp_gio1[1] -> ICMPError(10.30.30.10, parameterproblem) -> _xorp_rt4; > _xorp_cp1[1] -> ICMPError(10.30.30.10, redirect, host) -> _xorp_rt4; > > > And here we can see the correct routing table: > 10.10.10.11/32 - 2 > 10.30.30.10/32 - 2 > 10.10.10.0/24 - 0 > 10.30.30.0/24 - 1 > 10.20.20.0/24 10.10.10.10 0 > > (the subnet 10.20.20.0/24 come from the other router connected) > > So click know it. > > But if i do a : > > ping 10.20.20.10 (who exist) i have the following message: > connect: Network is unreachable > > The connect command doesn't know the click route :( > > I really don't know what do > > Thanks > > Luca > > Luca Belforte wrote: > > Hi Beyers, > > > > yes theoretically, but my problem is different. If y delete all the ip > > route in the kernel (ip route flush all) so I'm sure the kernel can't > > help. Then ping command doesn't work. > > > > My question is more how force click to process the who coming from the > > system itself? (like a ping or traceroute command) > > > > Or opposite how to be sure that click process it? > > > > thanks > > > > Luca > > > > Beyers Cronje wrote: > > > >> Hi Luca, > >> > >> Theoretically using FromDevice with "SNIFFER false" then the kernel > >> should not process the packets. > >> > >> Beyers > >> > >> On Wed, Nov 18, 2009 at 10:08 PM, Luca Belforte > >> <[email protected] > >> <mailto:[email protected]>> wrote: > >> > >> Hello, > >> > >> i have a xorp+click installation, who works, click receive the > correct > >> routes. > >> But if i want to do a ping, or traceroute it still use the kernel > >> route > >> informations. > >> I tried to disable the SNIFFING mode, but without success. > >> > >> How can i use click to route packet coming from the system? > >> > >> Thanks in advance > >> > >> Luca > >> _______________________________________________ > >> click mailing list > >> [email protected] <mailto:[email protected]> > >> https://amsterdam.lcs.mit.edu/mailman/listinfo/click > >> > >> > >> > > _______________________________________________ > > click mailing list > > [email protected] > > https://amsterdam.lcs.mit.edu/mailman/listinfo/click > > > > > _______________________________________________ > click mailing list > [email protected] > https://amsterdam.lcs.mit.edu/mailman/listinfo/click > _______________________________________________ click mailing list [email protected] https://amsterdam.lcs.mit.edu/mailman/listinfo/click
