Hi Kostas, Ha, more than 18 months later. You have the wrong EtherEncap type I think; you probably meant 0x0800, which is IP, not 0x8000, which is something else.
E Kostas Pelechrinis wrote: > Hi all, > > I am pretty new to using click so this question might seem simple to some > people :) and I would like to ask your help for this. I am trying to create > my own ping utility using click. I want to use the wireless interface ath0 > in order to ping another wireless node. I have written the following > configuration file > > ICMPPingSource(192.168.1.34,192.168.1.33,INTERVAL 1,LIMIT 10) > -> AddSeqno() > -> EtherEncap(0x8000, 00:02:6F:3E:2F:6D, 00:02:6F:3E:2F:5B) > -> WifiEncap(0x00, 0:0:0:0:0:0) > -> SetTXPower(63) > -> AthdescEncap() > -> ToDevice(ath0) > > It seems that the source is sending out packets but when I am doing tcpdump > at the receiver the packets do not seem to be icmp type. As a result i don't > get any ICMP_ECHO_REPLY back. What I wanted to ask you is if I need to write > any specific configuration for the receiver as well. Also how can I print > the statistics at the sender side as well? > > Thanks a lot for your help on this, > Kostas > > > > > > _______________________________________________ > click mailing list > [email protected] > https://amsterdam.lcs.mit.edu/mailman/listinfo/click _______________________________________________ click mailing list [email protected] https://amsterdam.lcs.mit.edu/mailman/listinfo/click
