You can run: /opt/drbl/sbin/mknic-nbi --check-server-name n to force to accept other DHCP service.
Steven. On 2011/8/24 上午 01:28, Juzar Valiji wrote: > Hi, > > I have installed/setup DRBL and CloneZilla server on Ubuntu 10.04 and > would like to use our windows DHCP server rather than the DRBL DHCP. > When the client machine boots I get the following message and stops at > this point: > > Obtaining IP address via DHCP... The order of network card to request IP > address is: eth0 Trying to obtain IP address via [eth0]... Maximum times > to try in this port [eth0]: 5. Leasing IP address via [eth0]. Try 5... > udhcpc (v1.18.5) started Sleep for 0 sec(s) to wait for this NIC > ready... Sending discover... Sending select for 10.18.12.10... Lease of > 10.18.12.10 obtained, lease time 691200 /I just want DHCP server with > server name "drbl" provides me an IP address... DHCP server name now is: > Only IP address offered by this DHCP server name will be accepted:/ > Unable to obtain IP address via wired link [eth0]! > ********************************************************************** > FATAL ERROR: Failed to mouth root filesystem!!! Please check: 1. Is the > driver of the network card loaded successfully in this computer? Press > Shift-Page Up to check the message in the screen. If not, maybe this > network card is too new so in this kernel "2.6.35-28-generic" a suitable > driver is not available! Run /bin/ls_pciid.sh then compare the results > with the file /usr/lib/mkpxeinitrd-net/initrd-skel/etc/pcitable in the > DRBL server. 2. The TCPwrapper setting (/etc/hosts.allow and > /etc/hosts.deny) and firewall rules in your DRBL server, do you block > the clients? 3. Is there any other DHCP server (server name is NOT > "drbl") in this subnet, and you force client to get IP address from DHCP > server (server name is "drbl")? 4. The DRBL server is able to > reverse-map this client IP address to obtain hostname. > ********************************************************************** > > /bin/sh: can't access tty; job control turned off > > > The only check that applies to my environment is "3. Is there any other > DHCP server..." > > On our Windows DHCP I have set Server Options: > > "066 Boot Server Host Name" with the IP address of the CloneZilla server > "067 Bootfile Name" with pxelinux.0 > > Is there a way to change the DHCP from "drbl" to our windows DHCP to > provide IP address? and if so what are the steps involved as my > knowledge in Linux is very limited. > > Any assistance provided would be very much appreciated. > > Thanks, > Juzar > > > > ------------------------------------------------------------------------------ > Get a FREE DOWNLOAD! and learn more about uberSVN rich system, > user administration capabilities and model configuration. Take > the hassle out of deploying and managing Subversion and the > tools developers use with it. http://p.sf.net/sfu/wandisco-d2d-2 > > > > _______________________________________________ > Clonezilla-server-edition mailing list > Clonezilla-server-edition@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/clonezilla-server-edition -- Steven Shiau <steven _at_ nchc org tw> <steven _at_ stevenshiau org> National Center for High-performance Computing, Taiwan. http://www.nchc.org.tw Public Key Server PGP Key ID: 1024D/9762755A Fingerprint: A2A1 08B7 C22C 3D06 34DB F4BC 08B3 E3D7 9762 755A ------------------------------------------------------------------------------ EMC VNX: the world's simplest storage, starting under $10K The only unified storage solution that offers unified management Up to 160% more powerful than alternatives and 25% more efficient. Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev _______________________________________________ Clonezilla-server-edition mailing list Clonezilla-server-edition@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/clonezilla-server-edition
