Hi, I get a token when I sourced the keystonerc_username during the installation, at the end of chapter 2.2
[admin@localhost ~(keystone_admin)]$ . ~/keystonerc_username [admin@localhost ~(keystone_username)]$ keystone user-list You are not authorized to perform the requested action: admin_required (HTTP 403) [admin@localhost ~(keystone_username)]$ keystone token-get +-----------+----------------------------------+ | Property | Value | +-----------+----------------------------------+ | expires | 2012-08-14T16:40:33Z | | id | 46a5fb183c41433a9056f3d2767e8828 | | tenant_id | e25e9888d7794365be31855d78ab92fa | | user_id | b1a894bcf56b4591814cb619026e240e | But now (after installing dashboard at chapter 5), when I’m entering the “keystone token-get” command, I got following output: [admin@localhost ~(keystone_username)]$ . ~/keystonerc_username [admin@localhost ~(keystone_username)]$ keystone user-list No handlers could be found for logger "keystoneclient.v2_0.client" Authorization Failed: An unexpected error prevented the server from fulfilling your request. (OperationalError) (1045, "Access denied for user 'keystone'@'localhost' (using password: YES)") None None (HTTP 500) [admin@localhost ~(keystone_username)]$ keystone token-get No handlers could be found for logger "keystoneclient.v2_0.client" Authorization Failed: An unexpected error prevented the server from fulfilling your request. (OperationalError) (1045, "Access denied for user 'keystone'@'localhost' (using password: YES)") None None (HTTP 500) I don’t know why it doesn’t work at the beginning and not at the end, after installing all the different Openstack modules. Do I have to modify the keystone.conf ? Thank you very much for your help. Nicolas Vogel Collaborateur scientifique Institut ICT Route de Cheseaux 1 1400 Yverdon-les-Bains Tél. : (+41) 24 557 64 74 From: [email protected] [mailto:[email protected]] On Behalf Of Adam Young Sent: lundi 13 août 2012 17:10 To: [email protected] Subject: Re: dashboard login On 08/13/2012 04:16 AM, Vogel Nicolas wrote: Hello, I made a new installation from openstack-essex on a CentOS 6.3 server using following doc : http://fedorapeople.org/~russellb/openstack-lab-rhsummit-2012/index.html<http://fedorapeople.org/%7Erussellb/openstack-lab-rhsummit-2012/index.html> Everything is working 100% fine, except some warnings because of deprecated functions but it doesn’t matter at this point. I can launch the dashboard interface in my browser (http://127.0.0.1/dashboard) but after that I’m unable to login with my credentials admin/secret or username/secret. I set the env. variables (OS_USERNAME and OS_PASSWORD) new and restart the openstack-keystone service but it doesn’t work. Dashboard does not use the env vars, so I am not too clear on what you are saying here. If you follow the instructions posted above, you should be able to source the keystonerc_admin file and do keystone token-get If that works, use the same userid and password to log in to the Dashboard. Same thing with the keystonerc_username file. If the Keystone CLI doesn't work, that is a different problem than the dashboard not working. Has someone an idea to fix the problem? Could I make all this installation by replacing the loopback address (127.0.0.1) with my eth0 physical IP-address? Thanks, Nicolas Vogel Collaborateur scientifique Institut ICT Route de Cheseaux 1 1400 Yverdon-les-Bains Tél. : (+41) 24 557 64 74 _______________________________________________ cloud mailing list [email protected]<mailto:[email protected]> https://admin.fedoraproject.org/mailman/listinfo/cloud
_______________________________________________ cloud mailing list [email protected] https://admin.fedoraproject.org/mailman/listinfo/cloud
