Kevin, We use it for both:
1) Add the first cluster in the zone 2) Configure network labels for the first cluster's hypervisor (physical network page) Hypervisor network labels have to be configured before we add the first host to the cluster. I can see why the placement might seem confusing, but we need to know the first hypervisor type before we start configuring physical network. -Alena. On 5/2/12 9:56 AM, "Kevin Kluge" <[email protected]> wrote: >Alena are you saying this is needed for the physical network step? Or >only in the add-cluster step at the end? > >I find the current placement and text quite confusing. It sounds like I >am saying this zone will be of this hypervisor type, which I know is not >true. > > >> -----Original Message----- >> From: Alena Prokharchyk [mailto:[email protected]] >> Sent: Wednesday, May 02, 2012 8:51 AM >> To: [email protected]; Salvatore Orlando >> Subject: Re: Add zone -- why hypervisor >> >> Not quite correct. It's used as a hypervisor for the first cluster you >>setup >> during "Add zone". It defines the hypervisor type for the host and >>network >> labels that you also setup during the add zone process. >> >> We don't use this setting as default anywhere else after the zone is >>created. >> >> -Alena. >> >> On 5/2/12 6:40 AM, "Salvatore Orlando" <[email protected]> >> wrote: >> >> >I believe it is used as a default setting for all clusters in the zone. >> >But then you are still free to override that setting for specific >> >clusters. >> > >> >Salvatore >> > >> >> -----Original Message----- >> >> From: Kevin Kluge [mailto:[email protected]] >> >> Sent: 02 May 2012 14:06 >> >> To: [email protected] >> >> Subject: Add zone -- why hypervisor >> >> >> >> When you add a zone in 3.0.x there is a field for Hypervisor. Why is >> >>that? >
