Hi We have following setup
management network(public IP range, 123.123.123.0/24) storage network(private IP range 10.2.0.0/24) public network(public IP range 111.111.111.0/24) 1 CP 1 Nic on management network 1 Nic on storage network 2*Host 1 Nic on management network 1 Nic on storage network 1 Nic on public network 1 storage 1 Nic on management network 1 nic on storage network Management server has an NFS share which mounted on the storage network as secondary storage. So two questions: 1. for the public network, there is no vlan setup, the IP is direct routed to both host server(they are on access point), the question is, while I config the public network and guest network, it always ask for vlan number, which we don't have. 2. We saw "no route to the host" error in all the template, ISOs, in which we can not create any instance on. Please, if any one have good suggestion in this network setup, how can we do it. -- -- Kind regards. Lu This transmission is intended solely for the addressee(s) shown above. It may contain information that is privileged, confidential or otherwise protected from disclosure. Any review, dissemination or use of this transmission or its contents by persons other than the intended addressee(s) is strictly prohibited. If you have received this transmission in error, please notify this office immediately and e-mail the original at the sender's address above by replying to this message and including the text of the transmission received.
