>From CloudStack 3.0 onwards, direct tagged networks are referred as Shared >networks. Shared guest networks can only be created by admin and in order to >create from CS UI, you need to go "Infrastructure --> Zones --> physical >Network -> Guest -> configure -> networks --> add guest network"
Thanks, SWAMY -----Original Message----- From: Sanjeev Neelarapu [mailto:sanjeev.neelar...@citrix.com] Sent: Wednesday, June 13, 2012 5:32 PM To: cloudstack-dev@incubator.apache.org; h...@anytimechinese.com Subject: RE: How Direct Attached Networking work Hi, In advanced networking the user VMs get private address by default. Please follow below steps for the user to have Direct attached networking: 1. Create network offering with guest type "Shared" 2. Create guest network using the network offering created at step 1 and while creating guest network you can specify the public ip range. 3. Deploy guest vm using the guest network created at step 2. Thanks, Sanjeev -----Original Message----- From: Lu Heng [mailto:h...@anytimechinese.com] Sent: Wednesday, June 13, 2012 4:01 PM To: cloudstack-dev@incubator.apache.org Subject: How Direct Attached Networking work Hi I have three network setup. Public network, management network, storage network. The public network is on the eth2, and I want user have Direct attached networking from eth2, however, everytime I create a VM, it gets an CIDR address(a private one), and when I go into the network second, in the drop down box of network offering, I only see "defauilt isoloated network offering with source net enabled", though when I go to service offering section, I saw 4 different type of offering. But none of them is direct attached networking. I looked at administration guide, it says nothing about how to set it up. Any one have ideas? -- -- Kind regards. Lu This transmission is intended solely for the addressee(s) shown above. It may contain information that is privileged, confidential or otherwise protected from disclosure. Any review, dissemination or use of this transmission or its contents by persons other than the intended addressee(s) is strictly prohibited. If you have received this transmission in error, please notify this office immediately and e-mail the original at the sender's address above by replying to this message and including the text of the transmission received.
