Seems like the Cloud agent in your KVM host is unable to accept the start request.
Try restarting this cloud agent on your KVM host? On May 16, 2012 8:45 PM, "Jose Rozanec" <[email protected]> wrote: > Jason, > > Thanks for the response. We are working to sort this out. I'll post updates > as soon as we solve this. > If anyone successfully dealt with something like this, we'll appreciate if > can provide some hints. > > Thanks, > > Jose. > > On Wed, May 16, 2012 at 10:11 PM, Jason Bausewein <[email protected] > >wrote: > > > I had the same problem with my first install, and not sure how to fix it. > > > > I found you need to put the host into maintenance mode before shutdown > > or reboot. If you do this, the system VMs will restart once the host > > is enabled again. > > > > Jason > > > > On Tue, May 15, 2012 at 2:08 PM, Jose Rozanec <[email protected]> > > wrote: > > > Hello, > > > > > > I managed to get cloudstack working ok, being able deploy VMs and ssh > to > > > them as well as to the virtual router and ssvm instances if needed. > > After a > > > host restart, cloudstack system vms remain in a stopped state, and I do > > not > > > find a way to start them. > > > From the logs (http://pastebin.com/QgpmMiwt) I'ld think is unable to > see > > > the host VM (the host with id=20 refers to the cloudstack host), but > the > > > host is up and running. After looking at the logs and searching over > the > > > web, I restarted the management server and the nfs service. > > > Can this be somewhat related to network interfaces on the host? > > > Here is the nics listing before the host restart: > > > http://pastebin.com/2iJRq3LC > > > Here is the nics listing after the host restart: > > > http://pastebin.com/NivyU7vZ > > > I think most of nics were deleted as they corresponded to expunged VMs. > > But > > > I'm not sure about cloudVirBr447 and cloudVirBr25, which I guess were > > > automatically created by CS to match internal and external VLANs, and > no > > > longer exist. Cloudstack host IP is 192.168.220.103, and is listed on > > > cloudbr0/eth0. > > > > > > We are running cs 3.0.1 using an advanced configuration. > > > > > > Any ideas/tips on this? > > > > > > Thanks in advance, > > > > > > Jose. > > > > > > > > > This email and any files transmitted with it are confidential and > > intended solely for the use of the individual or entity to whom they are > > addressed. > > > If you have received this email in error please notify the sender. > > > Please note that any views or opinions presented in this email are > > solely those of the author and do not necessarily represent those of the > > company. > > > Finally, the recipient should check this email and any attachments for > > the presence of viruses. > > > The company accepts no liability for any damage caused by any virus > > transmitted by this email. > > > > > This email and any files transmitted with it are confidential and intended > solely for the use of the individual or entity to whom they are addressed. > If you have received this email in error please notify the sender. > Please note that any views or opinions presented in this email are solely > those of the author and do not necessarily represent those of the company. > Finally, the recipient should check this email and any attachments for the > presence of viruses. > The company accepts no liability for any damage caused by any virus > transmitted by this email. >
