This is a know issue of xenserver. Ethtool should workaround. I use xs in a production and there are debian and ubuntu without troubles.
[]'s Diego Castro Em 27/06/2012 07:38, "Lennert den Teuling" <[email protected]> escreveu: > Op 27-06-12 08:31, ronald higgins schreef: > >> thanks all. >> >> still not having luck. >> >> if anyone has an Ubuntu 10.04 Server template that they're willing to >> share >> i would really appreciate it, being able to at least localize the issue >> will save my sanity. >> > > Hi Ronald, > > I read about this issue before, but never had any issues with obtaining > IPs in Debian or Ubuntu guests so didn't really looked in it. > > As i understand you are not able to get it working with any Debian based > OS. > > We currently run 2.2.14 in production and have some demo 3.x installs and > all of our Debian based guests get their IP from the virtual router. > > I don't know if it's any different but we do use basic networking on these > setups. As far i know, the same router VMs are used. We use KVM for all > these setups. > > We did not modify anything to the VMs, it are just basic installs from > recent ISOs. You can download a password enabled template we use from: > http://31.25.98.32/dump/**74ae6bd8-68c1-4667-af80-**7b39ea901980cow2<http://31.25.98.32/dump/74ae6bd8-68c1-4667-af80-7b39ea901980cow2> > > Hope this helps! > > Lennert > > On 26 Jun 2012 21:20, "Diego Spinola Castro" <[email protected]> >> wrote: >> >> Mike, try run command below on vrouter: >>> >>> /sbin/ethtool -K eth0 tx off >>> >>> >>> And refresh guest dhcp. >>> >>> >>> >>> >>> >>> 2012/6/26 Michael Simos <[email protected]> >>> >>> Check /var/log/messages for any errors. Also check /var/log/dnsmasq.log >>>> >>> on >>> >>>> the virtual router. If you are using VLANs then it could be a problem >>>> >>> with >>> >>>> your L2 switch. >>>> >>>> Mike >>>> >>>> ______________________________**__________ >>>> From: ronald higgins [[email protected]] >>>> Sent: Tuesday, June 26, 2012 8:08 AM >>>> To: Michael Simos >>>> Cc: >>>> cloudstack-users@incubator.**apache.org<[email protected]> >>>> Subject: Re: Ubuntu guest support status >>>> >>>> Thanks for the suggestion Simon. >>>> >>>> Copied the dhclient binary off a Centos 5.7, coped it to /sbin/ on the >>>> Ubuntu 10.04.4 box and created the links as described. Running the >>>> dhclient eth0 I can see that it's the RedHat version from the output >>>> but for some reason it's still not receiving DHCP offers from the VR: >>>> >>>> No DHCPOFFERS received. >>>> No working leases in persistent database - sleeping. >>>> >>>> Any thoughts? Not having any other DHCP related issues on other O.S's :/ >>>> >>>> On Mon, Jun 25, 2012 at 11:57 PM, Mike Simos <[email protected]> >>>> wrote: >>>> >>>>> Copy the dhclient binary from a CentOS 5.x system to /sbin. Then do: >>>>> >>>>> ln -s /var/lib/dhcp3 /var/lib/dhclient >>>>> dhclient eth0 >>>>> >>>>> Mike >>>>> >>>>> >>>>> On 06/25/2012 12:44 PM, ronald higgins wrote: >>>>> >>>>>> >>>>>> Hi All, >>>>>> >>>>>> I know that some time back there was an issue with Ubuntu VM's failing >>>>>> to obtain a DHCP Address from the VR. >>>>>> What is the current status on that issue. I'm running into that issue >>>>>> on a Ubuntu 10.04.4 deployment but see that on CS 3.0's release note >>>>>> it seems to indicate this has been resolved? >>>>>> >>>>>> 11056 DHCP issues with Debian/Ubuntu guest OS have been resolved. >>>>>> >>>>>> If it's the case that it's still borked would a kind soul perhaps >>>>>> share how you got the VM to to obtain the IP and how you replaced the >>>>>> stock isc-dhcp (dhcp3-client) ? >>>>>> >>>>>> Regards >>>>>> >>>>>> Ronald >>>>>> >>>>> >>>>> >>>>> >>>> >>> >> > >
