> -----Original Message----- > From: Caleb Call [mailto:calebc...@me.com] > Sent: Tuesday, July 03, 2012 8:47 PM > To: cloudstack-users@incubator.apache.org > Subject: Re: Removing a Zone > > > On Jul 3, 2012, at 3:20 PM, Caleb Call wrote: > > > > > On Jul 3, 2012, at 3:10 PM, Ahmad Emneina wrote: > > > >> On 7/3/12 1:50 PM, "Caleb Call" <calebc...@me.com> wrote: > >> > >>> We're setting up a cloudstack install and one of our guys setup the > first > >>> zone as a basic zone. We need the vlan support the advanced > provides so > >>> we're trying so remove the basic zone and recreate an advanced one. > >>> However, ever after removing system VMs, we are not able to remove > the > >>> pod. We get an error that says "There are private IP addresses > allocated > >>> for this pod". This isn't the case though (atleast not that we can > see). > >>> Is there anyway to see where the IPs are supposedly being used, > and/or > >>> forcibly remove this pod or zone? > >>> > >>> Thanks, > >>> Caleb > >>> > >> > >> What you might want to do is disable the zone and set the various > process > >> intervals for cleanup (found in the global settings section) to run > more > >> often. The params you will want to change are the following: > >> - expunge.interval > >> - expunge.delay > >> - network.gc.interval > >> - network.gc.wait > >> > >> These will require a service restart. I believe you have vm's that > have > >> yet to be expunged. This will speed up the process. > >> > >> -- > >> Æ > >> > >> > >> > > > > Excellent, We'll give that a shot and see if that clears them up (I'm > assuming it will). Thanks > > > > Thanks, > > Caleb > > > > > We applied these changes and we still get the same error. We changed > everything down to 1 sec and still no luck. We tried restarting the > service, nothing, we even rebooted the server with no luck. The odd > thing is the only VMs even built were the system VMs, we haven't even > attempted to build or spin-up any instances ourselves. Like I said, > we're still trying to get the networking piece configured properly. > Are there any other suggestions on what we could try? It wouldn't be a > big deal to just rebuild the management server but I'd like to figure > this out for when it's a prod machine and I have something like this > crop up.
How about another try: 1. disable the zone, which you want to remove: go to UI -> Infrastructure->zones->actions->disable 2. destroy all the system vms: go to UI -> Infrastructure->system vms-> if there are VMs are in stopped state, destroy them 3. delete your zone again? > > Thanks, > Caleb >
