James, There is a global configuration 'restart.retry.interval' that controls the retry interval of HA thread, can you try again with a smaller value, such as 120 or 60?
Regards Mice -----邮件原件----- 发件人: James Kahn [mailto:[email protected]] 发送时间: 2012年7月16日 10:38 收件人: [email protected] 主题: Re: 答复: XenServer and CloudStack - HA Hi Mice, When we tested we pulled the power from the pool master to simulate a hardware failure. Cheers, JK. -----Original Message----- From: Mice Xia <[email protected]> Reply-To: "[email protected]" <[email protected]> Date: Monday, 16 July 2012 12:22 PM To: "[email protected]" <[email protected]> Subject: 答复: XenServer and CloudStack - HA >Hi James, > >I think CS HA does protect pool master. In your environment, did HA fail >every time, or occasionally? >And the way pool master die make some difference, was it a management >network partition, a public network partition, a storage network >partition, or a host power down? > >Regards >Mice > >-----邮件原件----- >发件人: James Kahn [mailto:[email protected]] >发送时间: 2012年7月15日 18:16 >收件人: [email protected] >主题: XenServer and CloudStack - HA > >A while ago we tested XenServer and CloudStack HA. This was with XS 6.0 >and CS 3.0. > >Initially with XenServer HA disabled and CloudStack HA enabled, we found >that if the pool master dies, the VMs running on that host are not >restarted on other hosts by CloudStack HA – at least for the 20 minutes >we waited for something to happen. Not good. If any other host dies the >VMs are restarted promptly without issue. We assumed that this is because >CloudStack needs the pool master up. > >Testing again with XS HA in use to protect the pool master, and CS HA >enabled, HA functionality works. So we're running with XS HA protecting >the pool master and CS HA protecting the VMs. > >We've logged a Citrix case for an XS related issue and were told by the >support engineer that his cloudstack support manager said "with >cloudstack you should not use XS HA. Period. CS has got its own HA". >Which would be fine, except that CS HA doesn't work if the pool master >dies. At least with our testing. > >What's the go here? Does CS HA now protect the pool master? How should we >be configuring this? > >Thanks, >JK. > > >
