Thanks folks. I've solved my problem. I'm seeing the VM installing Ubuntu-10.04. :)
I've just executed cloud-setup-agent command in Hosts again. Then Total Storage is 500MB I've set and node is connected. And nfs is mounted. I want to connect to my VM but NICs Type is Shared. How does it changed to NAT? > -----Original Message----- > From: Changman Lee [mailto:cm224....@samsung.com] > Sent: Wednesday, September 12, 2012 2:22 PM > To: cloudstack-users@incubator.apache.org > Subject: RE: How to make VM from ISO file ??? > > Dear, Caleb. > > I've set primary storage and secondary storage at the begging of > installation. > > Do you mean it is correct that "Infrastructure > Total Storage" is > 0.00KB ? > When I've installed CS at the first, Total Storage is about 500MB. > And another problem exists. > I can't connect hosts. I've tried to reconnect forcely but failed. > > > >>> * Inftrastructure > Zones > zonde1 > Hosts > > >>> > > >>> Name ~~~ State > > >>> node1 Disconnected > > >>> node2 Disconnected > > > See the following logs more carefully, please. > > Regards. > > > -----Original Message----- > > From: Caleb Call [mailto:calebc...@me.com] > > Sent: Wednesday, September 12, 2012 1:26 PM > > To: cloudstack-users@incubator.apache.org > > Subject: Re: How to make VM from ISO file ??? > > > > You won't see it mounted anywhere. It gets mounted when it's needed. > You > > can see if you have it added in the UI by going to Infrastructure -> > View > > All (Zones) -> Select your Zone (zonde1 I'm guessing) -> Compute and > > Storage Tab -> View All (Primary Storage) > > > > Something to verify, log on to your kvm hosts and verify they can mount > > the primary and secondary storage mounts if you haven't already. > > > > The Username/Password it's looking for are the credentials for your kvm > > hosts. Usually root for the user. I'm sure there is somewhere in the db > > that you can update the credentials, but it's probably easier to remove > > each one and re-add to cloudstack given you don't have anything running > on > > them yet. > > > > > > On Sep 11, 2012, at 10:13 PM, Changman Lee <cm224....@samsung.com> wrote: > > > > > Thanks, Ahmad. > > > > > > Could you explain me about following log? Cant' find Password/username > > and > > > nfs mount fail etc. > > > Management server and hosts is running but I can't see mounted storage > > using > > > nfs on hosts. > > > > > > Manually I've mounted nfs on host successfully but can't see mounted > > storage > > > at UI. > > > > > >> -----Original Message----- > > >> From: Ahmad Emneina [mailto:ahmad.emne...@citrix.com] > > >> Sent: Wednesday, September 12, 2012 12:21 PM > > >> To: cloudstack-users@incubator.apache.org > > >> Subject: Re: How to make VM from ISO file ??? > > >> > > >> If your management host provides storage for host2 and host3 (kvm), > > >> rebooting management would cause the storage to become unavailable to > > the > > >> compute hosts. That, in turn, would trigger the hosts to self-fence > and > > >> reboot. So rebooting your storage server, during cloud operation, is > a > > bad > > >> thing. > > >> > > >> On 9/11/12 8:12 PM, "Changman Lee" <cm224....@samsung.com> wrote: > > >> > > >>> I have manager and node1 and node2 total 3 PC. > > >>> Manager services primary and secondary storage using NFS. > > >>> After installing cloudstack and rebooting, I got following logs. > > >>> > > >>> Why isn't primary and secondary storage mounted? > > >>> > > >>> > > >>> * Inftrastructure > Zones > zonde1 > Primary Storage > > >>> > > >>> Name: primary > > >>> Server: 192.168.2.2 > > >>> Path : /export/primary > > >>> > > >>> * Inftrastructure > Zones > zonde1 > Secondary Storage > > >>> Name : nfs://192.168.2.2/export/secondary > > >>> Created : xxxxxxx > > >>> State : Enabled > > >>> > > >>> * Inftrastructure > Zones > zonde1 > Hosts > > >>> > > >>> Name ~~~ State > > >>> node1 Disconnected > > >>> node2 Disconnected > > >>> > > >>> > > >>> I'm doubting it. Where can I find password/username ? > > >>> [cloud.resource.ResourceManagerImpl] (Job-Executor-6:job-29) Can't > > find > > >>> password/username > > >>> > > >>> > > >>> > > >>> 2012-09-12 11:47:09,714 DEBUG [cloud.async.AsyncJobManagerImpl] > > >>> (catalina-exec-19:null) submit async job-29, details: AsyncJobVO > > {id:29, > > >>> userId: 2, accountId: 2, sessionKey: null, instanceType: Host, > > >>> instanceId: 1, cmd: com.cloud.api.commands.ReconnectHostCmd, > > >>> cmdOriginator: null, cmdInfo: > > >>> {"id":"33ef132b-47f6-4805-bcf0- > > >> 78f830dd1bde","response":"json","sessionkey > > >> > > >> > > > ":"3ZshdhE+REqRjGoo5HpPIdgfCq8\u003d","ctxUserId":"2","_":"1347417886601", > > >>> "ctxAccountId":"2","ctxStartEventId":"117"}, cmdVersion: 0, > > callbackType: > > >>> 0, callbackAddress: null, status: 0, processStatus: 0, resultCode: 0, > > >>> result: null, initMsid: 255102172799379, completeMsid: null, > > lastUpdated: > > >>> null, lastPolled: null, created: null} > > >>> 2012-09-12 11:47:09,714 DEBUG [cloud.async.AsyncJobManagerImpl] > > >>> (Job-Executor-6:job-29) Executing > > com.cloud.api.commands.ReconnectHostCmd > > >>> for job-29 > > >>> 2012-09-12 11:47:09,718 DEBUG [cloud.resource.ResourceManagerImpl] > > >>> (Job-Executor-6:job-29) Can't find password/username > > >>> 2012-09-12 11:47:09,719 WARN [api.commands.ReconnectHostCmd] > > >>> (Job-Executor-6:job-29) Exception: > > >>> com.cloud.api.ServerApiException > > >>> at > > >> > > >> > > > com.cloud.api.commands.ReconnectHostCmd.execute(ReconnectHostCmd.java:104) > > >>> at com.cloud.api.ApiDispatcher.dispatch(ApiDispatcher.java:132) > > >>> at > > >>> > com.cloud.async.AsyncJobManagerImpl$1.run(AsyncJobManagerImpl.java:427) > > >>> at > > >>> > java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:471) > > >>> at > > >>> java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:334) > > >>> at java.util.concurrent.FutureTask.run(FutureTask.java:166) > > >>> at > > >> > > >> > > > java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java: > > >>> 1110) > > >>> at > > >>> > > > java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.jav > > >> a > > >>> :603) > > >>> at java.lang.Thread.run(Thread.java:679) > > >>> 2012-09-12 11:47:09,719 WARN [cloud.api.ApiDispatcher] > > >>> (Job-Executor-6:job-29) class com.cloud.api.ServerApiException : > null > > >>> 2012-09-12 11:47:09,720 DEBUG [cloud.async.AsyncJobManagerImpl] > > >>> (Job-Executor-6:job-29) Complete async job-29, jobStatus: 2, > > resultCode: > > >>> 530, result: com.cloud.api.response.ExceptionResponse@107e9366 > > >>> 2012-09-12 11:47:14,285 DEBUG [cloud.server.StatsCollector] > > >>> (StatsCollector-1:null) VmStatsCollector is running... > > >>> 2012-09-12 11:47:14,285 DEBUG [cloud.server.StatsCollector] > > >>> (StatsCollector-3:null) HostStatsCollector is running... > > >>> 2012-09-12 11:47:14,730 DEBUG [cloud.async.AsyncJobManagerImpl] > > >>> (catalina-exec-18:null) Async job-29 completed > > >>> 2012-09-12 11:47:14,766 DEBUG [cloud.server.StatsCollector] > > >>> (StatsCollector-1:null) StorageCollector is running... > > >>> 2012-09-12 11:47:14,768 DEBUG [cloud.server.StatsCollector] > > >>> (StatsCollector-1:null) There is no secondary storage VM for > secondary > > >>> storage host nfs://192.168.2.2/export/secondary > > >>> 2012-09-12 11:47:29,161 DEBUG > > >>> [storage.secondary.SecondaryStorageManagerImpl] (secstorage-1:null) > > Zone > > >>> 1 is not ready to launch secondary storage VM yet > > >>> 2012-09-12 11:47:29,224 DEBUG > > >>> [cloud.consoleproxy.ConsoleProxyManagerImpl] (consoleproxy-1:null) > > Zone 1 > > >>> is not ready to launch console proxy yet > > >>> 2012-09-12 11:47:29,762 DEBUG > > >>> [network.router.VirtualNetworkApplianceManagerImpl] > > >>> (RouterStatusMonitor-1:null) Found 0 routers. > > >>> 2012-09-12 11:47:59,161 DEBUG > > >>> [storage.secondary.SecondaryStorageManagerImpl] (secstorage-1:null) > > Zone > > >>> 1 is not ready to launch secondary storage VM yet > > >>> 2012-09-12 11:47:59,225 DEBUG > > >>> [cloud.consoleproxy.ConsoleProxyManagerImpl] (consoleproxy-1:null) > > Zone 1 > > >>> is not ready to launch console proxy yet > > >>> 2012-09-12 11:47:59,762 DEBUG > > >>> [network.router.VirtualNetworkApplianceManagerImpl] > > >>> (RouterStatusMonitor-1:null) Found 0 routers. > > >>> > > >>> > > >>>> -----Original Message----- > > >>>> From: Edison Su [mailto:edison...@citrix.com] > > >>>> Sent: Wednesday, September 12, 2012 11:56 AM > > >>>> To: cloudstack-users@incubator.apache.org > > >>>> Subject: RE: How to make VM from ISO file ??? > > >>>> > > >>>> Better to take a look at installation > > >>>> guide(http://download.cloud.com/releases/3.0.0/CloudStack3.0.0- > > >>>> 3.0.2InstallGuide.pdf), page 67. > > >>>> Basically, you need to tell mgt server to where is your storage, > > >>>> otherwise, > > >>>> mgt server doesn't know how to create vm. > > >>>> > > >>>>> -----Original Message----- > > >>>>> From: Changman Lee [mailto:cm224....@samsung.com] > > >>>>> Sent: Tuesday, September 11, 2012 7:33 PM > > >>>>> To: cloudstack-users@incubator.apache.org > > >>>>> Subject: RE: How to make VM from ISO file ??? > > >>>>> > > >>>>> Management server is used NFS server supporting /export/primary > and > > >>>>> /export/secondary. > > >>>>> > > >>>>> Node1 (cluster 1) and Node2 (cluster 2) use them through nfs. (e.g. > > >> In > > >>>>> node1, mount -t nfs manager:/export/primary /primarymount) > > >>>>> > > >>>>> If my configuration is wrong, How do I add primary storage in my > > >>>>> cluster 1 and cluster 2? > > >>>>> > > >>>>> > > >>>>> * Infrastructure > Clusters > cluster1 > > >>>>> > > >>>>> Name : cluster1 > > >>>>> ID : xxxxxxxxxxx > > >>>>> Zone : zone1 > > >>>>> Pod : pod1 > > >>>>> Hypervisor : KVM > > >>>>> Cluster Type : CloudManaged > > >>>>> State : Enabled > > >>>>> > > >>>>> Where can I see the primary storage?? > > >>>>> > > >>>>> > > >>>>>> -----Original Message----- > > >>>>>> From: Edison Su [mailto:edison...@citrix.com] > > >>>>>> Sent: Wednesday, September 12, 2012 11:13 AM > > >>>>>> To: cloudstack-users@incubator.apache.org > > >>>>>> Subject: RE: How to make VM from ISO file ??? > > >>>>>> > > >>>>>> Did you add primary storage in your clusters from UI? > > >>>>>> > > >>>>>>> -----Original Message----- > > >>>>>>> From: Changman Lee [mailto:cm224....@samsung.com] > > >>>>>>> Sent: Tuesday, September 11, 2012 5:10 PM > > >>>>>>> To: cloudstack-users@incubator.apache.org > > >>>>>>> Subject: RE: How to make VM from ISO file ??? > > >>>>>>> > > >>>>>>> > > >>>>>>> This is the /var/log/cloud/management/management-server.log > > >>>>>>> > > >>>>>>> It seems that my problem is storage allocation. > > >>>>>>> > > >>>>>>> My infrastructure information. > > >>>>>>> > > >>>>>>> * Zones > > >>>>>>> Zones : 1 > > >>>>>>> Pods : 1 > > >>>>>>> Cluster : 2 > > >>>>>>> Hosts : 2 > > >>>>>>> > > >>>>>>> * Hosts > > >>>>>>> Total Hosts : 2 > > >>>>>>> Total CPU : 39.61GHz > > >>>>>>> Total Memory : 7.64 GB > > >>>>>>> Total Storage: 0.00 KB > > >>>>>>> > > >>>>>>> Where is my storage gone ??? > > >>>>>>> And after rebooting manager, node1 and node2, Node1/2 does not > > >>>>> remount > > >>>>>>> NFS automatically. > > >>>>>>> So I was mounted nfs storage manually. > > >>>>>>> > > >>>>>>> > > >>>>>>> * Management Server > > >>>>>>> $ cat /etc/exports > > >>>>>>> /export *(rw,async,no_root_squash,no_subtree_check) > > >>>>>>> > > >>>>>>> * Node1 > > >>>>>>> $ mount > > >>>>>>> 192.168.2.2:/export/secondary on /secondarymount type nfs > > >>>>>>> (rw,addr=192.168.2.2) > > >>>>>>> 192.168.2.2:/export/primary on /primarymount type nfs > > >>>>>>> (rw,addr=192.168.2.2) > > >>>>>>> > > >>>>>>> * Node2 > > >>>>>>> $ mount > > >>>>>>> 192.168.2.2:/export/secondary on /secondarymount type nfs > > >>>>>>> (rw,addr=192.168.2.2) > > >>>>>>> 192.168.2.2:/export/primary on /primarymount type nfs > > >>>>>>> (rw,addr=192.168.2.2) > > >>>>>>> > > >>>>>>> > > >>>>>>> > > >>>>>>> 2012-09-12 08:35:17,099 DEBUG [agent.manager.AgentManagerImpl] > > >>>>>>> (AgentManager-Handler-1:null) Ping from 4 > > >>>>>>> 2012-09-12 08:35:22,329 DEBUG [cloud.user.AccountManagerImpl] > > >>>>>>> (catalina-exec-17:null) Access granted to Acct[2-admin] to > > >>>>> Domain:1/ by > > >>>>>>> DomainChecker > > >>>>>>> 2012-09-12 08:35:32,494 DEBUG [cloud.server.StatsCollector] > > >>>>>>> (StatsCollector-3:null) HostStatsCollector is running... > > >>>>>>> 2012-09-12 08:35:33,104 DEBUG > > > [cloud.vm.VirtualMachineManagerImpl] > > >>>>>>> (AgentManager-Handler-13:null) Cleanup succeeded. Details null > > >>>>>>> 2012-09-12 08:35:33,104 DEBUG [agent.transport.Request] > > >>>>>>> (StatsCollector-3:null) Seq 5-130942080: Received: { Ans: , > > >>>> MgmtId: > > >>>>>>> 255102172799379, via: 5, Ver: v1, Flags: 10, > > >>>>> { GetHostStatsAnswer } } > > >>>>>>> 2012-09-12 08:35:33,104 DEBUG > > > [cloud.vm.VirtualMachineManagerImpl] > > >>>>>>> (StatsCollector-3:null) Cleanup succeeded. Details null > > >>>>>>> 2012-09-12 08:35:41,866 DEBUG [cloud.user.AccountManagerImpl] > > >>>>>>> (catalina-exec-2:null) Access granted to Acct[2-admin] to > > >>>> Domain:1/ > > >>>>> by > > >>>>>>> DomainChecker > > >>>>>>> 2012-09-12 08:35:45,799 DEBUG > > >>>>>>> [storage.secondary.SecondaryStorageManagerImpl] > > >>>> (secstorage-1:null) > > >>>>>>> Zone 1 is ready to launch secondary storage VM > > >>>>>>> 2012-09-12 08:35:45,861 DEBUG > > >>>>>>> [cloud.consoleproxy.ConsoleProxyManagerImpl] > > > (consoleproxy-1:null) > > >>>>> Zone > > >>>>>>> 1 is ready to launch console proxy > > >>>>>>> 2012-09-12 08:35:46,357 DEBUG > > >>>>>>> [network.router.VirtualNetworkApplianceManagerImpl] > > >>>>>>> (RouterStatusMonitor-1:null) Found 0 routers. > > >>>>>>> 2012-09-12 08:35:47,764 DEBUG [cloud.vm.UserVmManagerImpl] > > >>>>> (catalina- > > >>>>>>> exec-4:null) Allocating in the DB for vm > > >>>>>>> 2012-09-12 08:35:47,764 DEBUG > > > [cloud.vm.VirtualMachineManagerImpl] > > >>>>>>> (catalina-exec-4:null) Allocating entries for VM: > > >>>> VM[User|i-2-5-VM] > > >>>>>>> 2012-09-12 08:35:47,769 DEBUG > > > [cloud.vm.VirtualMachineManagerImpl] > > >>>>>>> (catalina-exec-4:null) Allocating nics for VM[User|i-2-5-VM] > > >>>>>>> 2012-09-12 08:35:47,778 DEBUG > > > [cloud.vm.VirtualMachineManagerImpl] > > >>>>>>> (catalina-exec-4:null) Allocaing disks for VM[User|i-2-5-VM] > > >>>>>>> 2012-09-12 08:35:47,786 DEBUG > > > [cloud.vm.VirtualMachineManagerImpl] > > >>>>>>> (catalina-exec-4:null) Allocation completed for VM: VM[User|i-2- > > >> 5- > > >>>>> VM] > > >>>>>>> 2012-09-12 08:35:47,786 DEBUG [cloud.vm.UserVmManagerImpl] > > >>>>> (catalina- > > >>>>>>> exec-4:null) Successfully allocated DB entry for > > > VM[User|i-2-5-VM] > > >>>>>>> 2012-09-12 08:35:48,287 DEBUG [cloud.async.AsyncJobManagerImpl] > > >>>>>>> (catalina-exec-4:null) submit async job-23, details: AsyncJobVO > > >>>>> {id:23, > > >>>>>>> userId: 2, accountId: 2, sessionKey: null, instanceType: > > >>>>> VirtualMachine, > > >>>>>>> instanceId: 5, cmd: com.cloud.api.commands.DeployVMCmd, > > >>>>> cmdOriginator: > > >>>>>>> null, cmdInfo: {"id":"5","templateId":"92769d7f-2370-4b60-8f0a- > > >>>>>>> > > >>>>> > > >>>> > > fe538378b026","response":"json","sessionkey":"4CbSVVi04JEftDzlPJpwrEIU8 > > >>>>>>> > > >>>>> > > >>>> > > HI\u003d","ctxUserId":"2","hypervisor":"KVM","serviceOfferingId":"78a0e > > >>>>>>> b33-cd55-4d05-94f7-f145ca346c0b","diskOfferingId":"8809a2c9- > 41d0- > > >>>>> 4ec9- > > >>>>>>> b6dd- > > >>>>>>> > > >>>>> > > >>>> > > e9d275187c6c","_":"1347406404861","ctxAccountId":"2","ctxStartEventId": > > >>>>>>> "101","zoneId":"e8561b3a-1311-4ddb-ac8d-592dccc218ab"}, > > >>>> cmdVersion: > > >>>>> 0, > > >>>>>>> callbackType: 0, callbackAddress: null, status: 0, processStatus: > > >>>> 0, > > >>>>>>> resultCode: 0, result: null, initMsid: 255102172799379, > > >>>>> completeMsid: > > >>>>>>> null, lastUpdated: null, lastPolled: null, created: null} > > >>>>>>> 2012-09-12 08:35:48,288 DEBUG [cloud.async.AsyncJobManagerImpl] > > >>>>> (Job- > > >>>>>>> Executor-8:job-23) Executing com.cloud.api.commands.DeployVMCmd > > >>>> for > > >>>>>>> job-23 > > >>>>>>> 2012-09-12 08:35:48,414 DEBUG > > > [cloud.capacity.CapacityManagerImpl] > > >>>>>>> (Job-Executor-8:job-23) VM state transitted from :Stopped to > > >>>>> Starting > > >>>>>>> with event: StartRequestedvm's original host id: null new host > > > id: > > >>>>> null > > >>>>>>> host id before state transition: null > > >>>>>>> 2012-09-12 08:35:48,414 DEBUG > > > [cloud.vm.VirtualMachineManagerImpl] > > >>>>>>> (Job-Executor-8:job-23) Successfully transitioned to start state > > >>>>> for > > >>>>>>> VM[User|i-2-5-VM] reservation id = ef9ccb42-5ff6-404f-8a03- > > >>>>> de8fd02f447e > > >>>>>>> 2012-09-12 08:35:48,497 DEBUG > > > [cloud.vm.VirtualMachineManagerImpl] > > >>>>>>> (Job-Executor-8:job-23) Trying to deploy VM, vm has dcId: 1 and > > >>>>> podId: > > >>>>>>> null > > >>>>>>> 2012-09-12 08:35:48,497 DEBUG > > > [cloud.vm.VirtualMachineManagerImpl] > > >>>>>>> (Job-Executor-8:job-23) Deploy avoids pods: null, clusters: null, > > >>>>> hosts: > > >>>>>>> null > > >>>>>>> 2012-09-12 08:35:48,499 DEBUG [cloud.deploy.FirstFitPlanner] > > >> (Job- > > >>>>>>> Executor-8:job-23) DeploymentPlanner allocation algorithm: > random > > >>>>>>> 2012-09-12 08:35:48,499 DEBUG [cloud.deploy.FirstFitPlanner] > > >> (Job- > > >>>>>>> Executor-8:job-23) Trying to allocate a host and storage pools > > >>>> from > > >>>>>>> dc:1, pod:null,cluster:null, requested cpu: 500, requested ram: > > >>>>>>> 536870912 > > >>>>>>> 2012-09-12 08:35:48,499 DEBUG [cloud.deploy.FirstFitPlanner] > > >> (Job- > > >>>>>>> Executor-8:job-23) Is ROOT volume READY (pool already > > > allocated)?: > > >>>>> No > > >>>>>>> 2012-09-12 08:35:48,499 DEBUG [cloud.deploy.FirstFitPlanner] > > >> (Job- > > >>>>>>> Executor-8:job-23) Searching all possible resources under this > > >>>> Zone: > > >>>>> 1 > > >>>>>>> 2012-09-12 08:35:48,501 DEBUG [cloud.deploy.FirstFitPlanner] > > >> (Job- > > >>>>>>> Executor-8:job-23) Listing clusters in order of aggregate > > >>>> capacity, > > >>>>>>> that have (atleast one host with) enough CPU and RAM capacity > > >>>> under > > >>>>>>> this Zone: 1 > > >>>>>>> 2012-09-12 08:35:48,502 DEBUG [cloud.deploy.FirstFitPlanner] > > >> (Job- > > >>>>>>> Executor-8:job-23) CPUOverprovisioningFactor considered: 1.0 > > >>>>>>> 2012-09-12 08:35:48,511 DEBUG [cloud.deploy.FirstFitPlanner] > > >> (Job- > > >>>>>>> Executor-8:job-23) Checking resources in Cluster: 3 under Pod: 1 > > >>>>>>> 2012-09-12 08:35:48,511 DEBUG [cloud.deploy.FirstFitPlanner] > > >> (Job- > > >>>>>>> Executor-8:job-23) Calling HostAllocators to find suitable hosts > > >>>>>>> 2012-09-12 08:35:48,511 DEBUG [allocator.impl.FirstFitAllocator] > > >>>>> (Job- > > >>>>>>> Executor-8:job-23 FirstFitRoutingAllocator) Looking for hosts in > > >>>> dc: > > >>>>> 1 > > >>>>>>> pod:1 cluster:3 > > >>>>>>> 2012-09-12 08:35:48,513 DEBUG [allocator.impl.FirstFitAllocator] > > >>>>> (Job- > > >>>>>>> Executor-8:job-23 FirstFitRoutingAllocator) FirstFitAllocator > has > > >>>> 1 > > >>>>>>> hosts to check for allocation: [Host[-5-Routing]] > > >>>>>>> 2012-09-12 08:35:48,515 DEBUG [allocator.impl.FirstFitAllocator] > > >>>>> (Job- > > >>>>>>> Executor-8:job-23 FirstFitRoutingAllocator) Found 1 hosts for > > >>>>>>> allocation after prioritization: [Host[-5-Routing]] > > >>>>>>> 2012-09-12 08:35:48,515 DEBUG [allocator.impl.FirstFitAllocator] > > >>>>> (Job- > > >>>>>>> Executor-8:job-23 FirstFitRoutingAllocator) Looking for > > >>>>> speed=500Mhz, > > >>>>>>> Ram=512 > > >>>>>>> 2012-09-12 08:35:48,516 DEBUG > > > [cloud.capacity.CapacityManagerImpl] > > >>>>>>> (Job-Executor-8:job-23 FirstFitRoutingAllocator) Checking if > > > host: > > >>>>> 5 > > >>>>>>> has enough capacity for requested CPU: 500 and requested RAM: > > >>>>>>> 536870912 , cpuOverprovisioningFactor: 1.0 > > >>>>>>> 2012-09-12 08:35:48,518 DEBUG > > > [cloud.capacity.CapacityManagerImpl] > > >>>>>>> (Job-Executor-8:job-23 FirstFitRoutingAllocator) Hosts's actual > > >>>>> total > > >>>>>>> CPU: 12404 and CPU after applying overprovisioning: 12404 > > >>>>>>> 2012-09-12 08:35:48,518 DEBUG > > > [cloud.capacity.CapacityManagerImpl] > > >>>>>>> (Job-Executor-8:job-23 FirstFitRoutingAllocator) Free CPU: 12404 > > > , > > >>>>>>> Requested CPU: 500 > > >>>>>>> 2012-09-12 08:35:48,518 DEBUG > > > [cloud.capacity.CapacityManagerImpl] > > >>>>>>> (Job-Executor-8:job-23 FirstFitRoutingAllocator) Free RAM: > > >>>>> 4064256000 , > > >>>>>>> Requested RAM: 536870912 > > >>>>>>> 2012-09-12 08:35:48,518 DEBUG > > > [cloud.capacity.CapacityManagerImpl] > > >>>>>>> (Job-Executor-8:job-23 FirstFitRoutingAllocator) Host has enough > > >>>>> CPU > > >>>>>>> and RAM available > > >>>>>>> 2012-09-12 08:35:48,518 DEBUG > > > [cloud.capacity.CapacityManagerImpl] > > >>>>>>> (Job-Executor-8:job-23 FirstFitRoutingAllocator) STATS: Can > alloc > > >>>>> CPU > > >>>>>>> from host: 5, used: 0, reserved: 0, actual total: 12404, total > > >>>> with > > >>>>>>> overprovisioning: 12404; requested > > >>>>>>> cpu:500,alloc_from_last_host?:false ,considerReservedCapacity?: > > >>>>> true > > >>>>>>> 2012-09-12 08:35:48,518 DEBUG > > > [cloud.capacity.CapacityManagerImpl] > > >>>>>>> (Job-Executor-8:job-23 FirstFitRoutingAllocator) STATS: Can > alloc > > >>>>> MEM > > >>>>>>> from host: 5, used: 0, reserved: 0, total: 4064256000; requested > > >>>>> mem: > > >>>>>>> 536870912,alloc_from_last_host?:false ,considerReservedCapacity?: > > >>>>> true > > >>>>>>> 2012-09-12 08:35:48,518 DEBUG [allocator.impl.FirstFitAllocator] > > >>>>> (Job- > > >>>>>>> Executor-8:job-23 FirstFitRoutingAllocator) Found a suitable > > > host, > > >>>>>>> adding to list: 5 > > >>>>>>> 2012-09-12 08:35:48,518 DEBUG [allocator.impl.FirstFitAllocator] > > >>>>> (Job- > > >>>>>>> Executor-8:job-23 FirstFitRoutingAllocator) Host Allocator > > >>>>> returning 1 > > >>>>>>> suitable hosts > > >>>>>>> 2012-09-12 08:35:48,519 DEBUG [cloud.deploy.FirstFitPlanner] > > >> (Job- > > >>>>>>> Executor-8:job-23) Checking suitable pools for volume (Id, Type): > > >>>>>>> (8,ROOT) > > >>>>>>> 2012-09-12 08:35:48,519 DEBUG [cloud.deploy.FirstFitPlanner] > > >> (Job- > > >>>>>>> Executor-8:job-23) We need to allocate new storagepool for this > > >>>>> volume > > >>>>>>> 2012-09-12 08:35:48,519 DEBUG [cloud.deploy.FirstFitPlanner] > > >> (Job- > > >>>>>>> Executor-8:job-23) Calling StoragePoolAllocators to find > suitable > > >>>>> pools > > >>>>>>> 2012-09-12 08:35:48,519 DEBUG > > >>>>>>> [storage.allocator.FirstFitStoragePoolAllocator] (Job-Executor- > > >>>>> 8:job-23) > > >>>>>>> Looking for pools in dc: 1 pod:1 cluster:3 > > >>>>>>> 2012-09-12 08:35:48,520 DEBUG > > >>>>>>> [storage.allocator.FirstFitStoragePoolAllocator] (Job-Executor- > > >>>>> 8:job-23) > > >>>>>>> No storage pools available for allocation, returning > > >>>>>>> 2012-09-12 08:35:48,520 DEBUG [cloud.deploy.FirstFitPlanner] > > >> (Job- > > >>>>>>> Executor-8:job-23) No suitable pools found for volume: > > >>>>> Vol[8|vm=5|ROOT] > > >>>>>>> under cluster: 3 > > >>>>>>> 2012-09-12 08:35:48,520 DEBUG [cloud.deploy.FirstFitPlanner] > > >> (Job- > > >>>>>>> Executor-8:job-23) No suitable pools found > > >>>>>>> 2012-09-12 08:35:48,520 DEBUG [cloud.deploy.FirstFitPlanner] > > >> (Job- > > >>>>>>> Executor-8:job-23) No suitable storagePools found under this > > >>>>> Cluster: 3 > > >>>>>>> 2012-09-12 08:35:48,521 DEBUG [cloud.deploy.FirstFitPlanner] > > >> (Job- > > >>>>>>> Executor-8:job-23) Checking resources in Cluster: 1 under Pod: 1 > > >>>>>>> 2012-09-12 08:35:48,521 DEBUG [cloud.deploy.FirstFitPlanner] > > >> (Job- > > >>>>>>> Executor-8:job-23) Calling HostAllocators to find suitable hosts > > >>>>>>> 2012-09-12 08:35:48,521 DEBUG [allocator.impl.FirstFitAllocator] > > >>>>> (Job- > > >>>>>>> Executor-8:job-23 FirstFitRoutingAllocator) Looking for hosts in > > >>>> dc: > > >>>>> 1 > > >>>>>>> pod:1 cluster:1 > > >>>>>>> 2012-09-12 08:35:48,523 DEBUG [allocator.impl.FirstFitAllocator] > > >>>>> (Job- > > >>>>>>> Executor-8:job-23 FirstFitRoutingAllocator) FirstFitAllocator > has > > >>>> 0 > > >>>>>>> hosts to check for allocation: [] > > >>>>>>> 2012-09-12 08:35:48,524 DEBUG [allocator.impl.FirstFitAllocator] > > >>>>> (Job- > > >>>>>>> Executor-8:job-23 FirstFitRoutingAllocator) Found 0 hosts for > > >>>>>>> allocation after prioritization: [] > > >>>>>>> 2012-09-12 08:35:48,524 DEBUG [allocator.impl.FirstFitAllocator] > > >>>>> (Job- > > >>>>>>> Executor-8:job-23 FirstFitRoutingAllocator) Looking for > > >>>>> speed=500Mhz, > > >>>>>>> Ram=512 > > >>>>>>> 2012-09-12 08:35:48,524 DEBUG [allocator.impl.FirstFitAllocator] > > >>>>> (Job- > > >>>>>>> Executor-8:job-23 FirstFitRoutingAllocator) Host Allocator > > >>>>> returning 0 > > >>>>>>> suitable hosts > > >>>>>>> 2012-09-12 08:35:48,524 DEBUG [cloud.deploy.FirstFitPlanner] > > >> (Job- > > >>>>>>> Executor-8:job-23) No suitable hosts found > > >>>>>>> 2012-09-12 08:35:48,524 DEBUG [cloud.deploy.FirstFitPlanner] > > >> (Job- > > >>>>>>> Executor-8:job-23) No suitable hosts found under this Cluster: 1 > > >>>>>>> 2012-09-12 08:35:48,524 DEBUG [cloud.deploy.FirstFitPlanner] > > >> (Job- > > >>>>>>> Executor-8:job-23) Could not find suitable Deployment > Destination > > >>>>> for > > >>>>>>> this VM under any clusters, returning. > > >>>>>>> 2012-09-12 08:35:48,687 DEBUG > > > [cloud.capacity.CapacityManagerImpl] > > >>>>>>> (Job-Executor-8:job-23) VM state transitted from :Starting to > > >>>>> Stopped > > >>>>>>> with event: OperationFailedvm's original host id: null new host > > >>>> id: > > >>>>>>> null host id before state transition: null > > >>>>>>> 2012-09-12 08:35:48,854 DEBUG > > > [cloud.capacity.CapacityManagerImpl] > > >>>>>>> (Job-Executor-8:job-23) VM state transitted from :Stopped to > > >> Error > > >>>>> with > > >>>>>>> event: OperationFailedToErrorvm's original host id: null new > host > > >>>>> id: > > >>>>>>> null host id before state transition: null > > >>>>>>> 2012-09-12 08:35:49,634 INFO [api.commands.DeployVMCmd] (Job- > > >>>>> Executor- > > >>>>>>> 8:job-23) > > > com.cloud.exception.InsufficientServerCapacityException: > > >>>>>>> Unable to create a deployment for VM[User|i-2-5- > > >> VM]Scope=interface > > >>>>>>> com.cloud.dc.DataCenter; id=1 > > >>>>>>> 2012-09-12 08:35:49,634 WARN [cloud.api.ApiDispatcher] (Job- > > >>>>> Executor- > > >>>>>>> 8:job-23) class com.cloud.api.ServerApiException : Unable to > > >>>> create > > >>>>> a > > >>>>>>> deployment for VM[User|i-2-5-VM] > > >>>>>>> 2012-09-12 08:35:49,634 DEBUG [cloud.async.AsyncJobManagerImpl] > > >>>>> (Job- > > >>>>>>> Executor-8:job-23) Complete async job-23, jobStatus: 2, > > >>>> resultCode: > > >>>>> 530, > > >>>>>>> result: com.cloud.api.response.ExceptionResponse@4c307d36 > > >>>>>>> 2012-09-12 08:35:53,344 DEBUG [cloud.async.AsyncJobManagerImpl] > > >>>>>>> (catalina-exec-22:null) Async job-23 completed > > >>>>>>> 2012-09-12 08:35:54,536 DEBUG [agent.manager.AgentManagerImpl] > > >>>>>>> (AgentManager-Handler-3:null) Ping from 5 > > >>>>>>> > > >>>>>>> > > >>>>>>> > > >>>>>>> > > >>>>>>>> -----Original Message----- > > >>>>>>>> From: Edison Su [mailto:edison...@citrix.com] > > >>>>>>>> Sent: Tuesday, September 11, 2012 3:51 PM > > >>>>>>>> To: cloudstack-users@incubator.apache.org > > >>>>>>>> Cc: cloudstack-users@incubator.apache.org > > >>>>>>>> Subject: Re: How to make VM from ISO file ??? > > >>>>>>>> > > >>>>>>>> Can you take a look at management server log? > > >>>>>>>> > > >>>>>>>> Sent from my iPhone > > >>>>>>>> > > >>>>>>>> On Sep 10, 2012, at 9:32 PM, "Changman Lee" > > >>>>> <cm224....@samsung.com> > > >>>>>>> wrote: > > >>>>>>>> > > >>>>>>>>> Due to folks, I am here. > > >>>>>>>>> > > >>>>>>>>> Add Instance > > >>>>>>>>> > > >>>>>>>>> 1. Setup -> ISO > > >>>>>>>>> 2. Select Template / My ISOs -> ubuntu-10.04-desktop- > > >> amd64.iso > > >>>>>>>>> 3. Compute offering -> Medium Instance > > >>>>>>>>> 4. Data Disk offering -> Medium > > >>>>>>>>> 5. Network -> Nothing > > >>>>>>>>> 6. Review > > >>>>>>>>> > > >>>>>>>>> Then, Launc VM > > >>>>>>>>> * Details > > >>>>>>>>> > > >>>>>>>>> Internal name : i-2-3-vm > > >>>>>>>>> State : Error > > >>>>>>>>> Hypervisor : KVM > > >>>>>>>>> Group : NULL > > >>>>>>>>> Host : NULL > > >>>>>>>>> > > >>>>>>>>> > > >>>>>>>>> * NIC > > >>>>>>>>> IP Address : NULL > > >>>>>>>>> > > >>>>>>>>> > > >>>>>>>>> Where am I? Any clue??? > > >>>>>>>>> > > >>>>>>>>> Regards. > > >>>>>>>>> > > >>>>>>>>> > > >>>>>>>>>> -----Original Message----- > > >>>>>>>>>> From: Changman Lee [mailto:cm224....@samsung.com] > > >>>>>>>>>> Sent: Tuesday, September 11, 2012 1:20 PM > > >>>>>>>>>> To: cloudstack-users@incubator.apache.org > > >>>>>>>>>> Subject: RE: How to make VM from ISO file ??? > > >>>>>>>>>> > > >>>>>>>>>> Thanks folks. > > >>>>>>>>>> > > >>>>>>>>>> I found following. > > >>>>>>>>>> > > >>>>>>>> > > >>>>>>> > > >>>>> > > >>>> > > http://docs.cloudstack.org/Knowledge_Base/Templates%2F%2FISOs_upload_an > > >>>>>>> d_C > > >>>>>>>>>> on > > >>>>>>>>>> sole_Proxy_issues > > >>>>>>>>>> > > >>>>>>>>>> I'm downloading an ISO file after changed Global setting. > > >>>>>>>>>> > > >>>>>>>>>> Regards. > > >>>>>>>>>> > > >>>>>>>>>> > > >>>>>>>>>>> -----Original Message----- > > >>>>>>>>>>> From: Edison Su [mailto:edison...@citrix.com] > > >>>>>>>>>>> Sent: Tuesday, September 11, 2012 1:00 PM > > >>>>>>>>>>> To: cloudstack-users@incubator.apache.org > > >>>>>>>>>>> Subject: RE: How to make VM from ISO file ??? > > >>>>>>>>>>> > > >>>>>>>>>>> If you are in the corporate network, and need proxy to > > >>>> access > > >>>>>>> public > > >>>>>>>>>>> network, then downloading template/iso doesn't work. This > > >> is > > >>>>> a > > >>>>>>> known > > >>>>>>>>>> issue. > > >>>>>>>>>>> > > >>>>>>>>>>>> -----Original Message----- > > >>>>>>>>>>>> From: Changman Lee [mailto:cm224....@samsung.com] > > >>>>>>>>>>>> Sent: Monday, September 10, 2012 8:50 PM > > >>>>>>>>>>>> To: cloudstack-users@incubator.apache.org > > >>>>>>>>>>>> Subject: RE: How to make VM from ISO file ??? > > >>>>>>>>>>>> > > >>>>>>>>>>>> Thanks a lot Caleb Call. > > >>>>>>>>>>>> > > >>>>>>>>>>>> I added an ISO file with your advice. But I've encountered > > >>>>>>> another > > >>>>>>>>>>>> problem. > > >>>>>>>>>>>> It seems that my network setting has a problem. I'm using > > >>>>> proxy. > > >>>>>>>>>>>> > > >>>>>>>>>>>> > > >>>>>>>>>>>> Details. > > >>>>>>>>>>>> Zone name : zone1 > > >>>>>>>>>>>> Zond ID: ~~~~ > > >>>>>>>>>>>> Ready: No > > >>>>>>>>>>>> Status: Connection refused > > >>>>>>>>>>>> > > >>>>>>>>>>>> Maybe, do you know that manager accesses connection port > > >> to > > >>>>>>> download > > >>>>>>>>>>>> ISO > > >>>>>>>>>>>> file > > >>>>>>>>>>>> or log filename (/var/log/cloud/~~~~) to debug??? > > >>>>>>>>>>>> > > >>>>>>>>>>>> Authorized > > >>>>>>>>>>>> PC -- eth0 (proxy is set.) > > >>>>>>>>>>>> `- eth1 (192.168.2.1) <-------> Manager > > >>>>>>> (192.168.2.2) > > >>>>>>>>>>>> |--> > > > Node1 > > >>>>>>>>>>>> (192.168.2.10) > > >>>>>>>>>>>> `--> > > > Node2 > > >>>>>>>>>>>> (192.168.2.11) > > >>>>>>>>>>>> > > >>>>>>>>>>>> Regards. > > >>>>>>>>>>>> > > >>>>>>>>>>>> > > >>>>>>>>>>>>> -----Original Message----- > > >>>>>>>>>>>>> From: Caleb Call [mailto:calebc...@me.com] > > >>>>>>>>>>>>> Sent: Tuesday, September 11, 2012 11:13 AM > > >>>>>>>>>>>>> To: cloudstack-users@incubator.apache.org > > >>>>>>>>>>>>> Subject: Re: How to make VM from ISO file ??? > > >>>>>>>>>>>>> > > >>>>>>>>>>>>> Sorry, that should be Templates tab on the LEFT side. > > >>>>>>>>>>>>> > > >>>>>>>>>>>>> On Sep 10, 2012, at 8:12 PM, Caleb Call > > >> <calebc...@me.com> > > >>>>>>> wrote: > > >>>>>>>>>>>>> > > >>>>>>>>>>>>>> Go to the Templates tab on the right side, drop down the > > >>>>> menu > > >>>>>>> in > > >>>>>>>>>>>> the top > > >>>>>>>>>>>>> left, choose ISO. Then on the top right, choose Add ISO. > > >>>>> Once > > >>>>>>> it's > > >>>>>>>>>>>>> downloaded and installed, the State will be Ready, you > > >>>> will > > >>>>>>> find it > > >>>>>>>>>>>> in the > > >>>>>>>>>>>>> list of available ISOs. > > >>>>>>>>>>>>>> > > >>>>>>>>>>>>>> > > >>>>>>>>>>>>>> On Sep 10, 2012, at 8:04 PM, Changman Lee > > >>>>>>> <cm224....@samsung.com> > > >>>>>>>>>>>> wrote: > > >>>>>>>>>>>>>> > > >>>>>>>>>>>>>>> Thanks folks. > > >>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>> Okay, I'll try to create template with ISO first. :) > > >>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>> Next, question. > > >>>>>>>>>>>>>>> 1. Add Instance. > > >>>>>>>>>>>>>>> 2. Select a zone. -> Zone1 > > >>>>>>>>>>>>>>> 3. Select ISO or template. -> ISO > > >>>>>>>>>>>>>>> 4. My ISOs -> I can't look at any ISO files > > >>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>> Where should I upload an ISO file? > > >>>>>>>>>>>>>>> Where does the CloudStack find an ISO file from? > > >>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>> Regards. > > >>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>> -----Original Message----- > > >>>>>>>>>>>>>>>> From: Marcos Ortiz [mailto:marcos_or...@anadat.es] > > >>>>>>>>>>>>>>>> Sent: Monday, September 10, 2012 8:40 PM > > >>>>>>>>>>>>>>>> To: cloudstack-users@incubator.apache.org > > >>>>>>>>>>>>>>>> Subject: RE: How to make VM from ISO file ??? > > >>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>> Hi, > > >>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>> I always créate the first template from ISO, you only > > >>>>> need > > >>>>>>> to > > >>>>>>>>>>>> upload > > >>>>>>>>>>>>> to > > >>>>>>>>>>>>>>>> webserver, and upload to UI (the secondary storage VM > > >>>>> needs > > >>>>>>> to > > >>>>>>>>>>>> works > > >>>>>>>>>>>>> fine) > > >>>>>>>>>>>>>>>> once it´s upload and appear correctly in iso tabs, you > > >>>>> can > > >>>>>>> use > > >>>>>>>>>> it, > > >>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>> It´s important to mark the iso as bootable while > > >>>>> uploading, > > >>>>>>> also > > >>>>>>>>>>>> you > > >>>>>>>>>>>>> need > > >>>>>>>>>>>>>>>> to mark the featured check) > > >>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>> Regards > > >>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>> Marcos Ortiz > > >>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>> -----Mensaje original----- > > >>>>>>>>>>>>>>>> De: claude bariot [mailto:clobar...@gmail.com] > > >>>>>>>>>>>>>>>> Enviado el: lunes, 10 de septiembre de 2012 13:38 > > >>>>>>>>>>>>>>>> Para: cloudstack-users@incubator.apache.org > > >>>>>>>>>>>>>>>> Asunto: Re: How to make VM from ISO file ??? > > >>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>> I'm not sure that this methode run correctely in CS. > > >>>>> Because, > > >>>>>>> I > > >>>>>>>>>>>> never > > >>>>>>>>>>>>> make > > >>>>>>>>>>>>>>>> it successfuly. > > >>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>> Bat, for, me, the way for creating a nice instance is > > >>>> to > > >>>>> use > > >>>>>>>>>>>> template. > > >>>>>>>>>>>>>>>> - create your VM from xenserve or ESX before, and > > >>>>> install > > >>>>>>>>>>>> xentools or > > >>>>>>>>>>>>>>>> vmtools into your new Vm. > > >>>>>>>>>>>>>>>> - convert your VM to template, then, upload it to > > >> your > > >>>>> web > > >>>>>>>>>>>> server. > > >>>>>>>>>>>>>>>> - Fron VS UI, in the template tab, create a new > > >>>>> template ... > > >>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>> I think, this is the best way. > > >>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>> regards > > >>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>> On 10 September 2012 12:34, Nitin Mehta > > >>>>>>> <nitin.me...@citrix.com> > > >>>>>>>>>>>> wrote: > > >>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>> More importantly does it show as Ready in the > > >>>>> Templates/ISO > > >>>>>>>>>> tab ? > > >>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>> -----Original Message----- > > >>>>>>>>>>>>>>>>> From: Marcos Ortiz [mailto:marcos_or...@anadat.es] > > >>>>>>>>>>>>>>>>> Sent: Monday, September 10, 2012 3:57 PM > > >>>>>>>>>>>>>>>>> To: cloudstack-users@incubator.apache.org > > >>>>>>>>>>>>>>>>> Subject: RE: How to make VM from ISO file ??? > > >>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>> Hello, > > >>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>> Dou you upload the ISO file prior to deploy intance? > > >>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>> Regards > > >>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>> Marcos Ortiz > > >>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>> -----Mensaje original----- > > >>>>>>>>>>>>>>>>> De: Changman Lee [mailto:cm224....@samsung.com] > > >>>> Enviado > > >>>>> el: > > >>>>>>>>>>>> lunes, 10 > > >>>>>>>>>>>>>>>>> de septiembre de 2012 11:40 > > >>>>>>>>>>>>>>>>> Para: cloudstack-users@incubator.apache.org > > >>>>>>>>>>>>>>>>> Asunto: How to make VM from ISO file ??? > > >>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>> Hello. > > >>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>> Let me know where ISO file is put into, please. > > >>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>> I tried to make VM instance through UI, but I was not > > >>>>> able > > >>>>>>> to > > >>>>>>>>>>>> find My > > >>>>>>>>>>>>>>>> ISOs. > > >>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>> I'm using KVM and I want to make template using > > >>>> Ubuntu- > > >>>>>>> 12.04. > > >>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>> Thanks. > > >>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>> > > >>>>>>>>>>>>>> > > >>>>>>>>> > > >>>>> > > >>> > > >>> > > >>> > > >> > > >> > > >> -- > > >> Æ > > >> > > > > > >
