Hi Kirk, Thanks for your help! According to your hint, I had solved the trouble. I converted the disk controller of the template to lsilogic by vcenter. It seems that everything is very well when used the template to create instance on cloudstack.
Regards, Xintao Song -----Original Message----- From: Kirk Kosinski [mailto:kirkkosin...@gmail.com] Sent: 2013年2月1日 15:12 To: cloudstack-users@incubator.apache.org Subject: Re: Blue screen appear if using the template uploaded Hi, Xintao. What disk controller did you configure on your uploaded template? CloudStack only uses lsilogic and will ignore any special configuration in the OVF of an uploaded OVA template, so make sure that any VMs to be imported to CloudStack use the lsilogic disk controller. This should be simple if you are creating the template yourself, but might be a problem if you are using a virtual appliance from a vendor. I saw someone recently who wanted to use a Juniper virtual appliance, but it was configured with the buslogic controller for some reason and wouldn't boot when deployed via CloudStack with lsilogic. In that case Juniper built a new version that used lsilogic, but some vendors might not be so helpful. Another possible problem would be if the uploaded template includes multiple VMDKs and needs them all to boot. CloudStack doesn't support OVAs with multiple VMDKs (or with ISOs) and it will only use one VMDK from the OVA. I'm not sure what else would cause the BSOD you're seeing. If the above doesn't help, share a screen shot of the BSOD or at least the error code since it may help narrow down the problem. Kirk On 01/31/2013 07:02 PM, Xintao Song wrote: > Hello, > > > I had some trouble to create instance by template. But I could not know how > to solve it. > > > > Problems as below: > > I uploaded OVA template to cloudstack, and then create instance by this > template, but the bluescreen appears when the instance start. > > I am sure this template uploaded is well. But I did not know why the > bluescreen appeared by using this template uploaded to create instance on > cloudstack. > If I used ISO to create instance and convert it to template, and then create > instance again by this template, it is very well. > > My environment: > Cloudstack4.0+Vcenter5+Esxi5 > > Regards, > Xintao Song >
