Thanks ! Basic network, using 16 variable length mask, gateway, mask, start IP and end IP how to fill? I was planning: Gateway: 10.4.1.254 Mask: 255.255.254.0 Start IP: 10.4.0.1 End IP: 10.4.1.200
The error on the add the following information: The Start IP and endIP address range overlap with private IP :10.4.0.1:10.4.255.200 Is not CS4.0.1 not support variable-length mask writing ? 于 2013/3/13 8:19, Chiradeep Vittal 写道: > Basic Zone lets you create many small networks since the isolation is at > layer 3. > You could create large subnets, but what I've seen is that people create > pods of size /26 or /25. > > > On 3/11/13 10:40 PM, "deasonyang" <27598...@qq.com> wrote: > >> Xenserver6.0.2 >> >> Thanks . >> >> 于 2013/3/12 13:25, Chiradeep Vittal 写道: >>> Which hypervisor? In XS and KVM case broadcasts (except for ARP) are >>> suppressed. >>> >>> On 3/10/13 10:02 PM, "deasonyang" <27598...@qq.com> wrote: >>> >>>> Hi all, >>>> Traditional network, it is necessary to use VLANs to isolate broadcast >>>> more than 200 hosts, that basic ZONE Guest network host is best, how >>>> many? >>>> >>>> Guest network can use the 16-bit variable-length mask ? >>>> >>>> >>>> Best regards. >>> . >>> >
