Look no further. You'll find the recommended color codes attached. One
end of your cable will be either 568a or 568b. The other end will be
the crossed over coded end. So you have to cut that end off to do it
"right".
> well, if you don't want to redo the cable pulling, you can always chop the
> connector off one end and put a new connector on. you'll need a crimper. the
> docs to step you through getting the colours right in the new connection can
> be found on the 'net.
>
> - --
> Aaron J. Seigo
--
---------------------------------------------------------------------
Dave Bourassa at
http://members.shaw.ca/djb.enterprises/
mailto:[EMAIL PROTECTED]
---------------------------------------------------------------------
