possible fix:
vim /etc/X11/XF86Config or XF86Config-4 or whatever it is called.
Section "Monitor"
Identifier "Old-unlisted-monitor" (must be same as in Screen section)
VendorName "Digital"
ModelName "digital something"
HorizSync 31-60
VertRefresh 60-75
Endsection
<ESC>:wq
good luck
On Tue, Dec 03, 2002 at 08:17:59PM -0700, Robert Toole wrote:
> All,
>
> I had no problems setting up custom Monitor settings in RH 7.3 with
> Xconfigurator, which sadly seems to be missing from RH 8.0. All I need
> is to get a Horizontal refresh of 60 and a vertical of 75. When I try to
> add this to the GUI in RH 8.0, X won't start. If I put a range in with
> the highest numbers listed above, it picks a lower refresh than 75, and
> the flickering is driving me nuts.
>
> I've tried xf86config, but I get the same results.
>
> Using a Matrox G450, and an old Digital monitor that's not in the list.
>
> Ideas?
>
> Robert Toole
> [EMAIL PROTECTED]
>
--
--
Keith Robinson
"If I see further, it is because I stand on the shoulders of
giants." Isaac Newton
See further.
Allow the future to see further.
Support open technologies.
