I installed IPCop using 3 NICS (all 3-Com) 1 - 10mb/s ISA Card and 2 -10/100 PCI Cards. The installation went fairly well and had no issues with the installation discovering the ISA Card - it actually detected that one first. Being as the ISA Card is used on the red zone, it actually helped with eliminating which card wasn't to be used for the green zone. Not related to your problem, but may help later in the installation is to make sure you record the MAC addresses of the cards as you put them in the box. Once your installation is finished, login to the console and check the output of the ifconfig. Based on the MAC addresses and the IP addresses, it'll be easy to know which cards to connect to which zones.
Neil On Friday 06 June 2003 12:17, [EMAIL PROTECTED] wrote: >Hello > >I've some problem with IPCop. first, it doesnt detect one of my network > card. maybe its because its an ISA card ? I remember that poeple talked > about this problem on may's meeting... but I'm not able to use both card > at a time. i can use my PCI card as eth0 or eth1, but not both interface > at the same time. > >thanks. > >as a second question, if anyone have ever made a fax server with IPCop, I >would really like to have any informations about that. > >thanks > >Mathieu
