I'm not at the box right now, but I think the kernel is at 2.4.20r6.  I'll
check out the link later tonight... Thanks.

-----Original Message-----
From: Jacob C [mailto:[EMAIL PROTECTED]
Sent: Friday, August 15, 2003 11:55 AM
To: [EMAIL PROTECTED]
Subject: Re: (clug-talk) Intermitent network connection - resolved, sort
of


Which kernel are you running? Have you tried upgrading it? You might 
also consider having arp get entries from a file. A pretty in depth 
read-up on ARP for Linux is http://linux-ip.net/html/ether-arp.html - if 
your interested.

Shawn Grover wrote:
> At the last meeting I had asked for any tips on dealing with a
connectivity
> issue I was having.  My Gentoo server and workstation installs would
> periodically loose their connection to the internet.  To restore
> connectivity, I had to ping the external IP address of my firewall.  It
was
> suggested to look into icmp and upmp, but other than that I think I
stumped
> the crowd.
> 
> I have found a solution, though I don't think it's the "right" solution as
> it doesn't address or identify the root cause of the problem.  It turns
out
> that when I have lost connectivity, my ARP cache is empty (doing "arp -n"
or
> "arp -a" at the command prompt displays your cache).  ARP is used to map
the
> network card's MAC addresses to an IP address, which is required for
TCP/IP
> over ethernet.  When I have a connection, I have an ARP entry to my
> firewall's internal IP address.  So, as a work around, I wrote out the
entry
> when I had a connection, then did the following command:
> 
>   arp -s 192.168.0.1 ff:ff:ff:ff:ff:ff
> 
> (Where the ff:ff:ff:ff:ff:ff is the MAC address I wrote down).
> 
> This adds a permanent entry (well, until the next reboot) into the arp
> cache.  Once I did this, I didn't loose my internet connection at all.  
> 
> Now, as I said, this doesn't resolve the core problem - why am I loosing
the
> arp cache entry?  I've done some digging on this, and it is sometimes
caused
> by duplicate IP addresses on the same network, or assigning the subnet
> broadcast address to a device.  That's not the case on my network though.
> So I'm still looking (though not quite as hard anymore).  I thought I'd
post
> here to let those who tried to help know I found a solution, and to
possibly
> help anyone who may run into a similar problem (my research indicated
> similar issues on other platforms).
> 
> Shawn
> 
> 

Reply via email to