of the board and case... Please reasemble the computer carefully. Do not leave
pegs in the places, which are not forseen for the screws on the mainboard.
After everyting id reasembled and screwed firmly, run the memory test and
see the results. Mamory errors can cause yoor kernel crash.
Ray
Evan Brown wrote:
Hey guys
I went into the server last night with the intention of switching the socket that the ram was in, just to see if that might help, and then rum memtest86 on it. To my suprise when I touched the mb, it swing back a bit. It seems the pegs that hold the mb off of the case wall had sheared thru and the mb was only really hanging from the very last top corner peg. Could this have caused some of the problems I seem to have been facing? I figure that if the mb had touched the side of the case it could have killed/messed up/crashed the system. What do you guys think? Oh and I left memtest86 to run over night and it seems to have died sometime in the night leaving just a blue screen with a red strip across the top, weird.
Evan Brown
