Re: [clug-talk] WUFTPD Help?

[Jason Louie]

One reason might be that you internal network might be 100baseT while if you're using shaw you're going at 10baseT.  I personally run IPCop and SuSE8.2 in the network and I can ftp without any issues.  Might you have the DHCP least times at short intervals?  What about securities that you have on the firewall?  You might also have firewall settings on your ftp server.  Check and see if your server has any restrictions on addresses or users. Hope this helps... I might just be stabbing things in the dark but you never know. :) [EMAIL PROTECTED] wrote: Hello, I dont know if my problem is with WUFTPD or not but here goes. I have a redhat 7.1 box (Old I know) it has WUFTPD running. When I connect to it from within the network it is Fast, but from the net it is really slow. I have tryed moving it from a "Sonicwall Soho firewall" to a "Linksys BEFSR41 Router" and I have the same problem. It keeps droping the connection (not timing out, it actually looses the connection). I thought maby MTU size was wrong, so i changed that to 1300 (from 1500) on the linux box and still same results. Any help please. -Jim Akeson _______________________________________________ clug-talk mailing list [EMAIL PROTECTED] http://clug.ca/mailman/listinfo/clug-talk_clug.ca -- Jason Louie BSc. CPSC Web Applications Developer Sorex Software Inc. [EMAIL PROTECTED]

_______________________________________________
clug-talk mailing list
[EMAIL PROTECTED]
http://clug.ca/mailman/listinfo/clug-talk_clug.ca