On Tue, 2004-02-24 at 18:40, Jesse Kline wrote: > Quoting Curtis Sloan <[EMAIL PROTECTED]>: > > > Jesse, > > > > What kernel version are you using? I'm not too familiar with the last > > few 2.4 releases, but a perusal of the last few 2.6 releases shows at > > least some nForce fixes, including ACPI. > > > > Also, a custom kernel compile will make sure you have all the > > best/proper drivers for your system. An example (2.6 kernel): Device > > Drivers ---> ATA/ATAPI/MFM/RLL support ---> AMD and nVidia IDE support > > (CONFIG_BLK_DEV_AMD74XX) > > > > I'm not a Linux kernel OOPS debugger expert (IANALKODE? ;-) but my first > > instinct is that the kernel doesn't know about your hardware the best it > > could/should. > > I'm using the default SuSE 9.0 Pro kernel. 2.4.21 I think it is. I'd prefer not > to compile my own kernel, because I hate doing it since half the options make no > sense to me, but it may come to that (or I could try and sell the board and get > something else). Do you know if there is a 2.6.x rpm for SuSE 9.0?
Hmmm, after a little extra Googling, I happened upon something current: http://blizzard.vqbn.com/suse.de/people/mantel/next/RPM/ I'm sure it's not supported, but at least it is current (2.6.3). HTH, Curtis > > > On that note, which nForce board do you have? I'm assuming nForce2, but > > it might make a difference RE: kernel support. > > It's an nForce1 chipset. > > Thanks, > > Jesse > > > > _______________________________________________ > clug-talk mailing list > [EMAIL PROTECTED] > http://clug.ca/mailman/listinfo/clug-talk_clug.ca _______________________________________________ clug-talk mailing list [EMAIL PROTECTED] http://clug.ca/mailman/listinfo/clug-talk_clug.ca
