Try booting with the "noapic" kernel option. I had major problems with
2.4.20-.22 with my Shuttle box when the APIC was enabled.
As a side note, 2.6.2 w/ the latest ACPI patches works wonderfully, even
with the APIC enabled...
Jamie
-----Original Message-----
From: Jesse Kline
To: [EMAIL PROTECTED]
Sent: 2/24/04 10:06 PM
Subject: Re: [clug-talk] Linux on a nforce board - Please help!!
Quoting Jason Becker <[EMAIL PROTECTED]>:
> A tough nut to crack....
>
> What does "cat /proc/interrupts" say?
linux:/home/jesse # cat /proc/interrupts
CPU0
0: 2392428 XT-PIC timer
1: 11 XT-PIC keyboard
2: 0 XT-PIC cascade
8: 2 XT-PIC rtc
9: 0 XT-PIC acpi
10: 65961229 XT-PIC eth0, usb-ohci, usb-ohci
11: 165109 XT-PIC NVidia nForce, nvidia
14: 14868 XT-PIC ide0
15: 267 XT-PIC ide1
NMI: 0
LOC: 0
ERR: 0
MIS: 0
Thanks for your help,
Jesse
_______________________________________________
clug-talk mailing list
[EMAIL PROTECTED]
http://clug.ca/mailman/listinfo/clug-talk_clug.ca
_______________________________________________
clug-talk mailing list
[EMAIL PROTECTED]
http://clug.ca/mailman/listinfo/clug-talk_clug.ca
