mii-tool eth0 eth0: negotiated 100baseTx-FD flow-control, link ok
Thanks !
Peter
[EMAIL PROTECTED] wrote:
Try one of these:
mii-tool eth0 mii-tool -v eth0 or ethtool eth0
-----Original Message-----
Gang :
Got a Red Hat Linux 7.1 with a working nic on eth0.
Is there a simple way (cmd line) to check if it is configured and using it's full capacity 100Mb or not?
Thanks
Peter
_______________________________________________ clug-talk mailing list [EMAIL PROTECTED] http://clug.ca/mailman/listinfo/clug-talk_clug.ca
