On Wednesday 14 September 2005 11:49, Jarrod Major wrote: > On Wednesday 14 September 2005 11:07 am, Neil Bower wrote: > > I had installed a combo usb/firewire card and had no problems the > > hardware was recognized on bootup. > > > > It was a ST Lab PCI Firewire 1394 controller card. > > Actually, it looks like ST Labs is well supported and their stuff is rated > highly. I am checking out a card at Memory Express it's a 4 port (3 > external and one internal) the one internal looks like a regular USB port, > I'm going to have to figure out how I am going to be able to connect my > case front panel connectors to this... they are currently just pligged into > the mobo, standard pin connector. Might have to sacrifice a cable and do > some soldering...
for a few bucks, you can probably get the required cable at MemoryExpress as well. I noticed they have a number of types of USB cables. Shawn _______________________________________________ clug-talk mailing list [email protected] http://clug.ca/mailman/listinfo/clug-talk_clug.ca Mailing List Guidelines (http://clug.ca/ml_guidelines.php) **Please remove these lines when replying
