Hi Alex. You can't use your usual command-line tools like alsaconf to do more than isolate the problem and affect a temporary solution under suse. Once you get that, use yast2, it is a command-line tool, and make your adjustments permenant. The problem is likely a miss-detection of hardware, in this case the soundcard. The wrong module was loaded, or the right module was loaded with wrong parameters, fix this by removing the offending module using yast2 and inserting the correct module with the correct parameters. This would show up under normal(GUI) yast and left alone as such. I will assume that fixing the sound would fix the flash-sound issue as well. The usb speed issue could be the same, check the modules dealing with your usb hardware, and see if they think it is a 1.1 version or are just defaulting to 1.1 for making sure reasons. Also check the suse update, they are quite fast in fixing issues, there might allready be some updates in there for you that will address your problems. Cheers Szemir
On October 13, 2005 19:49, Alex wrote: > hey guys.. im having ALOT of problems with suse10... i got now sound any > more after running > 1) alsaconf > 2) flash has no audio > 3) my usb transfer rate is EXTREAMLY slow > > im running gnome and running into soo many problems im really thinking of > switching distro's if i can't find a solution > > any help would be greatly apreciated. _______________________________________________ clug-talk mailing list [email protected] http://clug.ca/mailman/listinfo/clug-talk_clug.ca Mailing List Guidelines (http://clug.ca/ml_guidelines.php) **Please remove these lines when replying
