-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
> cdrecord -v -dao speed=32 dev=ATAPI:0,1,0 KANOTIX-2005-03.iso FYI, on a recent kernel with kubuntu/debian, you can supply the device path for the dev= option. On my laptop this would be /dev/hdc, so the command above looks like: cdrecord -v -dao speed=32 dev=/dev/hdc KANOTIX-2005-03.iso > > I found were my favorite burner was with: > cdrecord -scanbus dev=ATAPI: Also, I used cdrecord -scanbus -dev=/dev/hdc to identify my burner, all other -dev options fail. Having said all that, I use k3b 90% of the time. It works out of the box unless you have a messed up kernel (which means that likely you broke it... unless you are running Red Hat... ) As always, YMMV depending on the usual suspects (Distro, hardware, blah blah blah) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDq8CYwRXgH3rKGfMRAorEAJ9XtD/uUWsNxVnYw/vyTSIyvgUtsQCePOxP MZoYwsympSNglrQEez3eMpU= =W6we -----END PGP SIGNATURE----- _______________________________________________ clug-talk mailing list [email protected] http://clug.ca/mailman/listinfo/clug-talk_clug.ca Mailing List Guidelines (http://clug.ca/ml_guidelines.php) **Please remove these lines when replying
