Hopefully someone will be able to point me in the right direction.

Evan
> Sorry, but like I said, I know 0 about IP chains, and IP tables. I'm 
> pretty much the kinda guy that just expects to plug it in, maybe set a 
> few IPs or DNS servers and have it work.
>
> On 9/20/06, *Evan Brown* <[EMAIL PROTECTED] 
> <mailto:[EMAIL PROTECTED]>> wrote:
>
>     I found this on the smoothwall site in the forums and since I know
>     nothing about iptables, does this look like it will work?
>
>     /Hi, i download and install Smoothwall 2 Express , only test the
>     smooth.
>     with
>     a green and orange configuration ISDN and DSL is disable , via web
>     administration put forwardings from GREEN to ORANGE zone and these
>     rules
>     not working , via ssh execute iptables -t nat -L and i dont view my
>     rule.... but if i edit
>     the rc.firewall.up and put manually the rules
>
>     "/sbin/iptables -t nat -A PREROUTING -p tcp -i $GREEN_DEV -d
>     10.1.1.229 <http://10.1.1.229>
>     --dport 23 -j DNAT --to 192.168.77.2:23 <http://192.168.77.2:23> "
>     "/sbin/iptables -A FORWARD -p tcp -i $ORANGE_DEV -d 192.168.77.2
>     <http://192.168.77.2> --dport
>     23 -j ACCEPT"
>
>     /Evan
>
>     the forward work and when execute iptables -t nat -L i view my
>     rule, and
>     Then
>     > Thats the nature of the beast. I've seen this happen on a number of
>     > systems, including mine -- m0n0wall.
>     > I don't think IPCop has this flaw though.
>     >
>     > AFAIK, there is no way around it; of course, I could just be blowing
>     > smoke.
>     >
>     > Out of curiosity, why can't you just use the local IP? Why do
>     you need
>     > to use the remote one?
>     >
>     > On 9/20/06, *Evan Brown* < [EMAIL PROTECTED]
>     <mailto:[EMAIL PROTECTED]>
>     > <mailto:[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>>> wrote:
>     >
>     >     Hi
>     >
>     >     I'm not sure if anyone is experienced with the Smoothwall fire
>     >     wall but
>     >     I have one setup and running well although I have a small
>     problem
>     >     from a
>     >     usability stand point. I need to connect from my green zone
>     to the red
>     >     zone using the red zone IP address. We are currently port
>     forwarding
>     >     from red to green and that works fine outside of the lan but
>     when
>     >     we on
>     >     the lan we can't hit the red zone ip. Any help would be
>     appreciated.
>     >
>     >     Evan Brown
>     >
>     >
>     >  replying
>



_______________________________________________
clug-talk mailing list
[email protected]
http://clug.ca/mailman/listinfo/clug-talk_clug.ca
Mailing List Guidelines (http://clug.ca/ml_guidelines.php)
**Please remove these lines when replying

Reply via email to