Hi Mark I was talking with Shawn today and he told me about the project. Can I jump into the group as well? I would be interested in the 7260.
Norm Olsen ----- Original Message ----- From: Mark Carlson <[EMAIL PROTECTED]> Date: Monday, September 24, 2007 7:48 pm Subject: [clug-talk] Linux SBC Workshop: Hardware Choice To: CLUG General <[email protected]> > Ok, the list of attendees is pretty much final now, so we should start > looking at what hardware to use. > > Here are my suggestions. I am leaning towards the TS-7260 > base model. > Remember that the prices are in USD, and may end up > costing an extra > 50% or more by the time it gets here. If you are > attending, please > let me know which one you would prefer. I will make sure that > whatever we order will be compatible from a workshop point of view > (which is why the TS-7400 is off the list.) The TS-7300 is > a little > different as well, but if someone really wants it, I can see if it > would fit into the workshop parameters. > > Again, an official list will be kept here: > http://mcarlson.ca/projects/index.php?page=Linux_SBC_Workshop > > TS-7200: http://www.embeddedarm.com/epc/ts7200-spec-p.php > ------ > * $150, or $165 with 16MB flash > * 200 MHz ARM9 processor with MMU > * 32 MB SDRAM > * 8 MB Flash disk (16 MB optional) > * 10/100 Ethernet > * Compact Flash > * 2 USB 2.0 Compatible OHCI ports (12 Mbit/s Max) > * 2 COM ports > * 20 DIO > * PC/104 expansion bus > * Optional A/D and RS-485 > > TS-7260: http://www.embeddedarm.com/epc/ts7260-spec-h.htm > ------ > * $179 or $195 for 64 MB RAM and 32 MB Flash > or $230 for 64 MB RAM > and 128 MB Flash > * 200Mhz ARM9 CPU with MMU > * 32 MB SDRAM (64-128 MB optional) > * High efficiency switching-mode power supply > (4.5-20VDC Unregulated Input) > * 32 MB on-board NAND flash drive > * Standard TS-XDIO* > * Optional SD Card socket* > * Optional 2 extra TTL serial ports* > * 2 USB 2.0 Compatible (12 Mbit/s max) > * 10/100 Ethernet port > * 30 total DIO pins > * 3 standard COM ports > * Watchdog timer > * 2-channel on-board 12-bit ADC > * PC/104 expansion bus > * SPI bus interface > * Matrix Keypad and text LCD support > * Optional Battery-Backed RTC > * Optional USB 802.11g WiFi with drivers > > TS-7250: http://www.embeddedarm.com/epc/ts7250-spec-h.html > ------ > * $150 or $190 for 64 MB RAM and 128 MB Flash > * 200 MHz ARM9 processor with MMU > * 32 MB SDRAM (64 MB optional) > * 32 MB Flash disk (128MB optional) > * 10/100 Ethernet > * USB Flash drives supported > * 2 USB ports, 2 COM ports, 20 DIO > * PC/104 expansion bus > * 5 channels 12-bit A/D converter > * Optional 8 channel A/D > * Optional RS-485 > > -Mark C. > > _______________________________________________ > clug-talk mailing list > [email protected] > http://clug.ca/mailman/listinfo/clug-talk_clug.ca > Mailing List Guidelines (http://clug.ca/ml_guidelines.php) > **Please remove these lines when replying >
_______________________________________________ clug-talk mailing list [email protected] http://clug.ca/mailman/listinfo/clug-talk_clug.ca Mailing List Guidelines (http://clug.ca/ml_guidelines.php) **Please remove these lines when replying
