On 5/30/10, Joseph Shuttleworth <[email protected]> wrote: > ----- Original Message ----- > From: Mark Carlson <[email protected]> > Date: Sunday, May 30, 2010 4:59 pm > Subject: Re: [clug-talk] Need drivers > To: CLUG General <[email protected]> > > > Interesting. Do you know which cards eth0 and eth3 belong > > to? It may > > be in your boot log, or the output of 'dmesg'. > I'm not sure. I checked the log and dmesg, but I looks confusing. Linux > changes the order > of eth at times. When I use ethtool eth3 was the only one I could get info > on and I have > the modem connected to the Macronix card if that helps. > > > Also, do you know if your network cards work in this configuration > > when you are using another OS? > I have XP on another partition and it works with the Macronix card.
Well, my last two suggestions are: 1. Try a live-cd based distro, since they include support for as many devices as they can. This may give you some insight into which drivers are used for your cards. 2. Ask on a Debian forum, since there may be a Debian specific solution to your problem. Good luck, Mark Carlson _______________________________________________ clug-talk mailing list [email protected] http://clug.ca/mailman/listinfo/clug-talk_clug.ca Mailing List Guidelines (http://clug.ca/ml_guidelines.php) **Please remove these lines when replying
