If are running stable32 from git, can you please revert: commit 8975bd6341b2d94c1f89279b1b00d4360da1f5ff
and see if it´s still a problem? Thanks Fabio On 7/10/2012 1:33 PM, Dietmar Maurer wrote: > I just updated from 3.1.8 to latest STABLE32: > > > > I use this cluster.conf: > > > > # cat /etc/cluster/cluster.conf > > <?xml version="1.0"?> > > <cluster config_version="235" name="test"> > > <cman keyfile="/var/lib/pve-cluster/corosync.authkey" transport="udpu"/> > > <clusternodes> > > <clusternode name="maui" nodeid="3" votes="1"/> > > <clusternode name="cnode1" nodeid="1" votes="1"/> > > </clusternodes> > > <rm> > > <pvevm autostart="0" vmid="100"/> > > </rm> > > </cluster> > > > > cman service starts without problems: > > > > # /etc/init.d/cman start > > Starting cluster: > > Checking if cluster has been disabled at boot... [ OK ] > > Checking Network Manager... [ OK ] > > Global setup... [ OK ] > > Loading kernel modules... [ OK ] > > Mounting configfs... [ OK ] > > Starting cman... [ OK ] > > Waiting for quorum... [ OK ] > > Starting fenced... [ OK ] > > Starting dlm_controld... [ OK ] > > Starting GFS2 Control Daemon: gfs_controld. > > Unfencing self... [ OK ] > > Joining fence domain... [ OK ] > > > > And the corosync objdb contains: > > > > # corosync-objctl|grep cluster.cman > > cluster.cman.keyfile=/var/lib/pve-cluster/corosync.authkey > > cluster.cman.transport=udpu > > cluster.cman.nodename=maui > > cluster.cman.cluster_id=1678 > > > > Note: there is a value for ‘nodename’ and ‘cluster_id’ > > > > Now I simply increase the version inside cluster.conf (on both nodes): > > > > # cat /etc/cluster/cluster.conf > > <?xml version="1.0"?> > > <cluster config_version="236" name="test"> > > <cman keyfile="/var/lib/pve-cluster/corosync.authkey" transport="udpu"/> > > <clusternodes> > > <clusternode name="maui" nodeid="3" votes="1"/> > > <clusternode name="cnode1" nodeid="1" votes="1"/> > > </clusternodes> > > <rm> > > <pvevm autostart="0" vmid="100"/> > > </rm> > > </cluster> > > > > And trigger a reload: > > > > # cman_tool version -r –S > > cman_tool: Error loading configuration in corosync/cman > > > > And the syslog have more details: > > > > Jul 10 13:28:25 maui corosync[488675]: [CMAN ] cman was unable to > determine our node name! > > Jul 10 13:28:25 maui corosync[488675]: [CMAN ] Can't get updated > config version: Successfully read config from /etc/cluster/cluster.conf#012. > > Jul 10 13:28:25 maui corosync[488675]: [CMAN ] Continuing activity > with old configuration > > > > Somehow the nodename and cluster_id values are removed from the corosync > objdb: > > > > # corosync-objctl|grep cluster.cman > > cluster.cman.keyfile=/var/lib/pve-cluster/corosync.authkey > > cluster.cman.transport=udpu > > > > > > Any Idea why that happens? > > > > - Dietmar > > >
