That's not what I wanted to read of course. :) Has there been any thoughts given to adding support for this? When building through a vcproj you can cross-compile win32/x64 on 32 and 64 bits Windows, provided the proper compiler tools have been installed.
Anyway, it's not the end of the world. Thanks for the quick reply, Bill. Stephane -----Original Message----- From: Bill Hoffman [mailto:[EMAIL PROTECTED] Sent: February 23, 2007 5:02 PM To: Stephane Rouleau (Consultant) Cc: [email protected] Subject: Re: [CMake] Correct way to build for 64 bit? Stephane Rouleau (Consultant) wrote: > [snip] > 2. For the windows cl, a try compile is done to figure out which cl > you are using. For the IDE, there is a separate generator for the 64 > bit tool because you have to use a different tool. So, you either run > vcvars64.bat then cmake for nmake, or you pick the 64 bit IDE build. > [...] > > I've just started playing with cmake, downloaded the source to go > along with the documentation, so I may be reading this wrong... > > It looks like with the current incarnation you cannot generate a > single .vcproj with two platforms (one for Win32, one for x64), and so > we'd have to run cmake twice and specify different output directories > for the two solution files. Am I reading this correctly? > That is correct, you have to run CMake twice, once for 32 bit and once for 64 bit, just use different output directories. -Bill _______________________________________________ CMake mailing list [email protected] http://www.cmake.org/mailman/listinfo/cmake
