Hi David,
Thanks for the reply.
I'm do not quite understand your remarks. I cannot find
"cmCPackNSISGenerator.cxx" in my CMake tree. This may be because I am
using the binary package of CMake and not building from sources.
Also, I cannot find the string "File /r" in NSIS.template.in (see
attached file).
Looking forward to your reply.
Regards,
Dan
On 10/15/2012 1:21 PM, David Cole wrote:
Of course, you must be if you're actually seeing the message box....
Never mind my silly question.
It looks to me like it should be executed before any installation commands.
The variable CPACK_NSIS_FULL_INSTALL is set to "File /r
\"${INST_DIR}\\*.*\"" in Source/CPack/cmCPackNSISGenerator.cxx and
that should be inserted directly after your extra code.
Does the configure NSIS.template file look correct? (i.e. -- is the
File /r command after the MessageBox call?)
On Mon, Oct 15, 2012 at 1:18 PM, David Cole <[email protected]> wrote:
Are you using CMake 2.8.9?
That variable did not exist prior to 2.8.9.
On Mon, Oct 8, 2012 at 12:33 PM, dan h. <[email protected]> wrote:
Any thoughts about this issue?
Regards,
Dan
--
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the CMake FAQ at:
http://www.cmake.org/Wiki/CMake_FAQ
Follow this link to subscribe/unsubscribe:
http://www.cmake.org/mailman/listinfo/cmake
; CPack install script designed for a nmake build
;--------------------------------
; You must define these values
!define VERSION "@CPACK_PACKAGE_VERSION@"
!define PATCH "@CPACK_PACKAGE_VERSION_PATCH@"
!define INST_DIR "@CPACK_TEMPORARY_DIRECTORY@"
;--------------------------------
;Variables
Var MUI_TEMP
Var STARTMENU_FOLDER
Var SV_ALLUSERS
Var START_MENU
Var DO_NOT_ADD_TO_PATH
Var ADD_TO_PATH_ALL_USERS
Var ADD_TO_PATH_CURRENT_USER
Var INSTALL_DESKTOP
Var IS_DEFAULT_INSTALLDIR
;--------------------------------
;Include Modern UI
!include "MUI.nsh"
;Default installation folder
InstallDir "@CPACK_NSIS_INSTALL_ROOT@\@CPACK_PACKAGE_INSTALL_DIRECTORY@"
;--------------------------------
;General
;Name and file
Name "@CPACK_NSIS_PACKAGE_NAME@"
OutFile "@CPACK_TOPLEVEL_DIRECTORY@/@CPACK_OUTPUT_FILE_NAME@"
;Set compression
SetCompressor @CPACK_NSIS_COMPRESSOR@
@CPACK_NSIS_DEFINES@
!include Sections.nsh
;--- Component support macros: ---
; The code for the add/remove functionality is from:
; http://nsis.sourceforge.net/Add/Remove_Functionality
; It has been modified slightly and extended to provide
; inter-component dependencies.
Var AR_SecFlags
Var AR_RegFlags
@CPACK_NSIS_SECTION_SELECTED_VARS@
; Loads the "selected" flag for the section named SecName into the
; variable VarName.
!macro LoadSectionSelectedIntoVar SecName VarName
SectionGetFlags ${${SecName}} $${VarName}
IntOp $${VarName} $${VarName} & ${SF_SELECTED} ;Turn off all other bits
!macroend
; Loads the value of a variable... can we get around this?
!macro LoadVar VarName
IntOp $R0 0 + $${VarName}
!macroend
; Sets the value of a variable
!macro StoreVar VarName IntValue
IntOp $${VarName} 0 + ${IntValue}
!macroend
!macro InitSection SecName
; This macro reads component installed flag from the registry and
;changes checked state of the section on the components page.
;Input: section index constant name specified in Section command.
ClearErrors
;Reading component status from registry
ReadRegDWORD $AR_RegFlags HKLM
"Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@\Components\${SecName}"
"Installed"
IfErrors "default_${SecName}"
;Status will stay default if registry value not found
;(component was never installed)
IntOp $AR_RegFlags $AR_RegFlags & ${SF_SELECTED} ;Turn off all other bits
SectionGetFlags ${${SecName}} $AR_SecFlags ;Reading default section flags
IntOp $AR_SecFlags $AR_SecFlags & 0xFFFE ;Turn lowest (enabled) bit off
IntOp $AR_SecFlags $AR_RegFlags | $AR_SecFlags ;Change lowest bit
; Note whether this component was installed before
!insertmacro StoreVar ${SecName}_was_installed $AR_RegFlags
IntOp $R0 $AR_RegFlags & $AR_RegFlags
;Writing modified flags
SectionSetFlags ${${SecName}} $AR_SecFlags
"default_${SecName}:"
!insertmacro LoadSectionSelectedIntoVar ${SecName} ${SecName}_selected
!macroend
!macro FinishSection SecName
; This macro reads section flag set by user and removes the section
;if it is not selected.
;Then it writes component installed flag to registry
;Input: section index constant name specified in Section command.
SectionGetFlags ${${SecName}} $AR_SecFlags ;Reading section flags
;Checking lowest bit:
IntOp $AR_SecFlags $AR_SecFlags & ${SF_SELECTED}
IntCmp $AR_SecFlags 1 "leave_${SecName}"
;Section is not selected:
;Calling Section uninstall macro and writing zero installed flag
!insertmacro "Remove_${${SecName}}"
WriteRegDWORD HKLM
"Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@\Components\${SecName}"
\
"Installed" 0
Goto "exit_${SecName}"
"leave_${SecName}:"
;Section is selected:
WriteRegDWORD HKLM
"Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@\Components\${SecName}"
\
"Installed" 1
"exit_${SecName}:"
!macroend
!macro RemoveSection SecName
; This macro is used to call section's Remove_... macro
;from the uninstaller.
;Input: section index constant name specified in Section command.
!insertmacro "Remove_${${SecName}}"
!macroend
; Determine whether the selection of SecName changed
!macro MaybeSelectionChanged SecName
!insertmacro LoadVar ${SecName}_selected
SectionGetFlags ${${SecName}} $R1
IntOp $R1 $R1 & ${SF_SELECTED} ;Turn off all other bits
; See if the status has changed:
IntCmp $R0 $R1 "${SecName}_unchanged"
!insertmacro LoadSectionSelectedIntoVar ${SecName} ${SecName}_selected
IntCmp $R1 ${SF_SELECTED} "${SecName}_was_selected"
!insertmacro "Deselect_required_by_${SecName}"
goto "${SecName}_unchanged"
"${SecName}_was_selected:"
!insertmacro "Select_${SecName}_depends"
"${SecName}_unchanged:"
!macroend
;--- End of Add/Remove macros ---
;--------------------------------
;Interface Settings
!define MUI_HEADERIMAGE
!define MUI_ABORTWARNING
;--------------------------------
; path functions
!verbose 3
!include "WinMessages.NSH"
!verbose 4
;----------------------------------------
; based upon a script of "Written by KiCHiK 2003-01-18 05:57:02"
;----------------------------------------
!verbose 3
!include "WinMessages.NSH"
!verbose 4
;====================================================
; get_NT_environment
; Returns: the selected environment
; Output : head of the stack
;====================================================
!macro select_NT_profile UN
Function ${UN}select_NT_profile
StrCmp $ADD_TO_PATH_ALL_USERS "1" 0 environment_single
DetailPrint "Selected environment for all users"
Push "all"
Return
environment_single:
DetailPrint "Selected environment for current user only."
Push "current"
Return
FunctionEnd
!macroend
!insertmacro select_NT_profile ""
!insertmacro select_NT_profile "un."
;----------------------------------------------------
!define NT_current_env 'HKCU "Environment"'
!define NT_all_env 'HKLM "SYSTEM\CurrentControlSet\Control\Session
Manager\Environment"'
!ifndef WriteEnvStr_RegKey
!ifdef ALL_USERS
!define WriteEnvStr_RegKey \
'HKLM "SYSTEM\CurrentControlSet\Control\Session Manager\Environment"'
!else
!define WriteEnvStr_RegKey 'HKCU "Environment"'
!endif
!endif
; AddToPath - Adds the given dir to the search path.
; Input - head of the stack
; Note - Win9x systems requires reboot
Function AddToPath
Exch $0
Push $1
Push $2
Push $3
# don't add if the path doesn't exist
IfFileExists "$0\*.*" "" AddToPath_done
ReadEnvStr $1 PATH
; if the path is too long for a NSIS variable NSIS will return a 0
; length string. If we find that, then warn and skip any path
; modification as it will trash the existing path.
StrLen $2 $1
IntCmp $2 0 CheckPathLength_ShowPathWarning CheckPathLength_Done
CheckPathLength_Done
CheckPathLength_ShowPathWarning:
Messagebox MB_OK|MB_ICONEXCLAMATION "Warning! PATH too long installer
unable to modify PATH!"
Goto AddToPath_done
CheckPathLength_Done:
Push "$1;"
Push "$0;"
Call StrStr
Pop $2
StrCmp $2 "" "" AddToPath_done
Push "$1;"
Push "$0\;"
Call StrStr
Pop $2
StrCmp $2 "" "" AddToPath_done
GetFullPathName /SHORT $3 $0
Push "$1;"
Push "$3;"
Call StrStr
Pop $2
StrCmp $2 "" "" AddToPath_done
Push "$1;"
Push "$3\;"
Call StrStr
Pop $2
StrCmp $2 "" "" AddToPath_done
Call IsNT
Pop $1
StrCmp $1 1 AddToPath_NT
; Not on NT
StrCpy $1 $WINDIR 2
FileOpen $1 "$1\autoexec.bat" a
FileSeek $1 -1 END
FileReadByte $1 $2
IntCmp $2 26 0 +2 +2 # DOS EOF
FileSeek $1 -1 END # write over EOF
FileWrite $1 "$\r$\nSET PATH=%PATH%;$3$\r$\n"
FileClose $1
SetRebootFlag true
Goto AddToPath_done
AddToPath_NT:
StrCmp $ADD_TO_PATH_ALL_USERS "1" ReadAllKey
ReadRegStr $1 ${NT_current_env} "PATH"
Goto DoTrim
ReadAllKey:
ReadRegStr $1 ${NT_all_env} "PATH"
DoTrim:
StrCmp $1 "" AddToPath_NTdoIt
Push $1
Call Trim
Pop $1
StrCpy $0 "$1;$0"
AddToPath_NTdoIt:
StrCmp $ADD_TO_PATH_ALL_USERS "1" WriteAllKey
WriteRegExpandStr ${NT_current_env} "PATH" $0
Goto DoSend
WriteAllKey:
WriteRegExpandStr ${NT_all_env} "PATH" $0
DoSend:
SendMessage ${HWND_BROADCAST} ${WM_WININICHANGE} 0 "STR:Environment"
/TIMEOUT=5000
AddToPath_done:
Pop $3
Pop $2
Pop $1
Pop $0
FunctionEnd
; RemoveFromPath - Remove a given dir from the path
; Input: head of the stack
Function un.RemoveFromPath
Exch $0
Push $1
Push $2
Push $3
Push $4
Push $5
Push $6
IntFmt $6 "%c" 26 # DOS EOF
Call un.IsNT
Pop $1
StrCmp $1 1 unRemoveFromPath_NT
; Not on NT
StrCpy $1 $WINDIR 2
FileOpen $1 "$1\autoexec.bat" r
GetTempFileName $4
FileOpen $2 $4 w
GetFullPathName /SHORT $0 $0
StrCpy $0 "SET PATH=%PATH%;$0"
Goto unRemoveFromPath_dosLoop
unRemoveFromPath_dosLoop:
FileRead $1 $3
StrCpy $5 $3 1 -1 # read last char
StrCmp $5 $6 0 +2 # if DOS EOF
StrCpy $3 $3 -1 # remove DOS EOF so we can compare
StrCmp $3 "$0$\r$\n" unRemoveFromPath_dosLoopRemoveLine
StrCmp $3 "$0$\n" unRemoveFromPath_dosLoopRemoveLine
StrCmp $3 "$0" unRemoveFromPath_dosLoopRemoveLine
StrCmp $3 "" unRemoveFromPath_dosLoopEnd
FileWrite $2 $3
Goto unRemoveFromPath_dosLoop
unRemoveFromPath_dosLoopRemoveLine:
SetRebootFlag true
Goto unRemoveFromPath_dosLoop
unRemoveFromPath_dosLoopEnd:
FileClose $2
FileClose $1
StrCpy $1 $WINDIR 2
Delete "$1\autoexec.bat"
CopyFiles /SILENT $4 "$1\autoexec.bat"
Delete $4
Goto unRemoveFromPath_done
unRemoveFromPath_NT:
StrCmp $ADD_TO_PATH_ALL_USERS "1" unReadAllKey
ReadRegStr $1 ${NT_current_env} "PATH"
Goto unDoTrim
unReadAllKey:
ReadRegStr $1 ${NT_all_env} "PATH"
unDoTrim:
StrCpy $5 $1 1 -1 # copy last char
StrCmp $5 ";" +2 # if last char != ;
StrCpy $1 "$1;" # append ;
Push $1
Push "$0;"
Call un.StrStr ; Find `$0;` in $1
Pop $2 ; pos of our dir
StrCmp $2 "" unRemoveFromPath_done
; else, it is in path
# $0 - path to add
# $1 - path var
StrLen $3 "$0;"
StrLen $4 $2
StrCpy $5 $1 -$4 # $5 is now the part before the path to remove
StrCpy $6 $2 "" $3 # $6 is now the part after the path to remove
StrCpy $3 $5$6
StrCpy $5 $3 1 -1 # copy last char
StrCmp $5 ";" 0 +2 # if last char == ;
StrCpy $3 $3 -1 # remove last char
StrCmp $ADD_TO_PATH_ALL_USERS "1" unWriteAllKey
WriteRegExpandStr ${NT_current_env} "PATH" $3
Goto unDoSend
unWriteAllKey:
WriteRegExpandStr ${NT_all_env} "PATH" $3
unDoSend:
SendMessage ${HWND_BROADCAST} ${WM_WININICHANGE} 0 "STR:Environment"
/TIMEOUT=5000
unRemoveFromPath_done:
Pop $6
Pop $5
Pop $4
Pop $3
Pop $2
Pop $1
Pop $0
FunctionEnd
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Uninstall sutff
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
###########################################
# Utility Functions #
###########################################
;====================================================
; IsNT - Returns 1 if the current system is NT, 0
; otherwise.
; Output: head of the stack
;====================================================
; IsNT
; no input
; output, top of the stack = 1 if NT or 0 if not
;
; Usage:
; Call IsNT
; Pop $R0
; ($R0 at this point is 1 or 0)
!macro IsNT un
Function ${un}IsNT
Push $0
ReadRegStr $0 HKLM "SOFTWARE\Microsoft\Windows NT\CurrentVersion"
CurrentVersion
StrCmp $0 "" 0 IsNT_yes
; we are not NT.
Pop $0
Push 0
Return
IsNT_yes:
; NT!!!
Pop $0
Push 1
FunctionEnd
!macroend
!insertmacro IsNT ""
!insertmacro IsNT "un."
; StrStr
; input, top of stack = string to search for
; top of stack-1 = string to search in
; output, top of stack (replaces with the portion of the string remaining)
; modifies no other variables.
;
; Usage:
; Push "this is a long ass string"
; Push "ass"
; Call StrStr
; Pop $R0
; ($R0 at this point is "ass string")
!macro StrStr un
Function ${un}StrStr
Exch $R1 ; st=haystack,old$R1, $R1=needle
Exch ; st=old$R1,haystack
Exch $R2 ; st=old$R1,old$R2, $R2=haystack
Push $R3
Push $R4
Push $R5
StrLen $R3 $R1
StrCpy $R4 0
; $R1=needle
; $R2=haystack
; $R3=len(needle)
; $R4=cnt
; $R5=tmp
loop:
StrCpy $R5 $R2 $R3 $R4
StrCmp $R5 $R1 done
StrCmp $R5 "" done
IntOp $R4 $R4 + 1
Goto loop
done:
StrCpy $R1 $R2 "" $R4
Pop $R5
Pop $R4
Pop $R3
Pop $R2
Exch $R1
FunctionEnd
!macroend
!insertmacro StrStr ""
!insertmacro StrStr "un."
Function Trim ; Added by Pelaca
Exch $R1
Push $R2
Loop:
StrCpy $R2 "$R1" 1 -1
StrCmp "$R2" " " RTrim
StrCmp "$R2" "$\n" RTrim
StrCmp "$R2" "$\r" RTrim
StrCmp "$R2" ";" RTrim
GoTo Done
RTrim:
StrCpy $R1 "$R1" -1
Goto Loop
Done:
Pop $R2
Exch $R1
FunctionEnd
Function ConditionalAddToRegisty
Pop $0
Pop $1
StrCmp "$0" "" ConditionalAddToRegisty_EmptyString
WriteRegStr SHCTX
"Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@"
\
"$1" "$0"
;MessageBox MB_OK "Set Registry: '$1' to '$0'"
DetailPrint "Set install registry entry: '$1' to '$0'"
ConditionalAddToRegisty_EmptyString:
FunctionEnd
;--------------------------------
!ifdef CPACK_USES_DOWNLOAD
Function DownloadFile
IfFileExists $INSTDIR\* +2
CreateDirectory $INSTDIR
Pop $0
; Skip if already downloaded
IfFileExists $INSTDIR\$0 0 +2
Return
StrCpy $1 "@CPACK_DOWNLOAD_SITE@"
try_again:
NSISdl::download "$1/$0" "$INSTDIR\$0"
Pop $1
StrCmp $1 "success" success
StrCmp $1 "Cancelled" cancel
MessageBox MB_OK "Download failed: $1"
cancel:
Return
success:
FunctionEnd
!endif
;--------------------------------
; Installation types
@CPACK_NSIS_INSTALLATION_TYPES@
;--------------------------------
; Component sections
@CPACK_NSIS_COMPONENT_SECTIONS@
;--------------------------------
; Define some macro setting for the gui
@CPACK_NSIS_INSTALLER_MUI_ICON_CODE@
@CPACK_NSIS_INSTALLER_ICON_CODE@
@CPACK_NSIS_INSTALLER_MUI_COMPONENTS_DESC@
@CPACK_NSIS_INSTALLER_MUI_FINISHPAGE_RUN_CODE@
;--------------------------------
;Pages
!insertmacro MUI_PAGE_WELCOME
!insertmacro MUI_PAGE_LICENSE "@CPACK_RESOURCE_FILE_LICENSE@"
Page custom InstallOptionsPage
!insertmacro MUI_PAGE_DIRECTORY
;Start Menu Folder Page Configuration
!define MUI_STARTMENUPAGE_REGISTRY_ROOT "SHCTX"
!define MUI_STARTMENUPAGE_REGISTRY_KEY
"Software\@CPACK_PACKAGE_VENDOR@\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@"
!define MUI_STARTMENUPAGE_REGISTRY_VALUENAME "Start Menu Folder"
!insertmacro MUI_PAGE_STARTMENU Application $STARTMENU_FOLDER
@CPACK_NSIS_PAGE_COMPONENTS@
!insertmacro MUI_PAGE_INSTFILES
!insertmacro MUI_PAGE_FINISH
!insertmacro MUI_UNPAGE_CONFIRM
!insertmacro MUI_UNPAGE_INSTFILES
;--------------------------------
;Languages
!insertmacro MUI_LANGUAGE "English" ;first language is the default language
!insertmacro MUI_LANGUAGE "Albanian"
!insertmacro MUI_LANGUAGE "Arabic"
!insertmacro MUI_LANGUAGE "Basque"
!insertmacro MUI_LANGUAGE "Belarusian"
!insertmacro MUI_LANGUAGE "Bosnian"
!insertmacro MUI_LANGUAGE "Breton"
!insertmacro MUI_LANGUAGE "Bulgarian"
!insertmacro MUI_LANGUAGE "Croatian"
!insertmacro MUI_LANGUAGE "Czech"
!insertmacro MUI_LANGUAGE "Danish"
!insertmacro MUI_LANGUAGE "Dutch"
!insertmacro MUI_LANGUAGE "Estonian"
!insertmacro MUI_LANGUAGE "Farsi"
!insertmacro MUI_LANGUAGE "Finnish"
!insertmacro MUI_LANGUAGE "French"
!insertmacro MUI_LANGUAGE "German"
!insertmacro MUI_LANGUAGE "Greek"
!insertmacro MUI_LANGUAGE "Hebrew"
!insertmacro MUI_LANGUAGE "Hungarian"
!insertmacro MUI_LANGUAGE "Icelandic"
!insertmacro MUI_LANGUAGE "Indonesian"
!insertmacro MUI_LANGUAGE "Irish"
!insertmacro MUI_LANGUAGE "Italian"
!insertmacro MUI_LANGUAGE "Japanese"
!insertmacro MUI_LANGUAGE "Korean"
!insertmacro MUI_LANGUAGE "Kurdish"
!insertmacro MUI_LANGUAGE "Latvian"
!insertmacro MUI_LANGUAGE "Lithuanian"
!insertmacro MUI_LANGUAGE "Luxembourgish"
!insertmacro MUI_LANGUAGE "Macedonian"
!insertmacro MUI_LANGUAGE "Malay"
!insertmacro MUI_LANGUAGE "Mongolian"
!insertmacro MUI_LANGUAGE "Norwegian"
!insertmacro MUI_LANGUAGE "Polish"
!insertmacro MUI_LANGUAGE "Portuguese"
!insertmacro MUI_LANGUAGE "PortugueseBR"
!insertmacro MUI_LANGUAGE "Romanian"
!insertmacro MUI_LANGUAGE "Russian"
!insertmacro MUI_LANGUAGE "Serbian"
!insertmacro MUI_LANGUAGE "SerbianLatin"
!insertmacro MUI_LANGUAGE "SimpChinese"
!insertmacro MUI_LANGUAGE "Slovak"
!insertmacro MUI_LANGUAGE "Slovenian"
!insertmacro MUI_LANGUAGE "Spanish"
!insertmacro MUI_LANGUAGE "Swedish"
!insertmacro MUI_LANGUAGE "Thai"
!insertmacro MUI_LANGUAGE "TradChinese"
!insertmacro MUI_LANGUAGE "Turkish"
!insertmacro MUI_LANGUAGE "Ukrainian"
!insertmacro MUI_LANGUAGE "Welsh"
;--------------------------------
;Reserve Files
;These files should be inserted before other files in the data block
;Keep these lines before any File command
;Only for solid compression (by default, solid compression is enabled for
BZIP2 and LZMA)
ReserveFile "NSIS.InstallOptions.ini"
!insertmacro MUI_RESERVEFILE_INSTALLOPTIONS
;--------------------------------
;Installer Sections
Section "-Core installation"
;Use the entire tree produced by the INSTALL target. Keep the
;list of directories here in sync with the RMDir commands below.
@CPACK_NSIS_EXTRA_PREINSTALL_COMMANDS@
SetOutPath "$INSTDIR"
@CPACK_NSIS_FULL_INSTALL@
;Store installation folder
WriteRegStr SHCTX
"Software\@CPACK_PACKAGE_VENDOR@\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@" ""
$INSTDIR
;Create uninstaller
WriteUninstaller "$INSTDIR\Uninstall.exe"
Push "DisplayName"
Push "@CPACK_NSIS_DISPLAY_NAME@"
Call ConditionalAddToRegisty
Push "DisplayVersion"
Push "@CPACK_PACKAGE_VERSION@"
Call ConditionalAddToRegisty
Push "Publisher"
Push "@CPACK_PACKAGE_VENDOR@"
Call ConditionalAddToRegisty
Push "UninstallString"
Push "$INSTDIR\Uninstall.exe"
Call ConditionalAddToRegisty
Push "NoRepair"
Push "1"
Call ConditionalAddToRegisty
!ifdef CPACK_NSIS_ADD_REMOVE
;Create add/remove functionality
Push "ModifyPath"
Push "$INSTDIR\AddRemove.exe"
Call ConditionalAddToRegisty
!else
Push "NoModify"
Push "1"
Call ConditionalAddToRegisty
!endif
; Optional registration
Push "DisplayIcon"
Push "$INSTDIR\@CPACK_NSIS_INSTALLED_ICON_NAME@"
Call ConditionalAddToRegisty
Push "HelpLink"
Push "@CPACK_NSIS_HELP_LINK@"
Call ConditionalAddToRegisty
Push "URLInfoAbout"
Push "@CPACK_NSIS_URL_INFO_ABOUT@"
Call ConditionalAddToRegisty
Push "Contact"
Push "@CPACK_NSIS_CONTACT@"
Call ConditionalAddToRegisty
!insertmacro MUI_INSTALLOPTIONS_READ $INSTALL_DESKTOP
"NSIS.InstallOptions.ini" "Field 5" "State"
!insertmacro MUI_STARTMENU_WRITE_BEGIN Application
;Create shortcuts
CreateDirectory "$SMPROGRAMS\$STARTMENU_FOLDER"
@CPACK_NSIS_CREATE_ICONS@
@CPACK_NSIS_CREATE_ICONS_EXTRA@
CreateShortCut "$SMPROGRAMS\$STARTMENU_FOLDER\Uninstall.lnk"
"$INSTDIR\Uninstall.exe"
;Read a value from an InstallOptions INI file
!insertmacro MUI_INSTALLOPTIONS_READ $DO_NOT_ADD_TO_PATH
"NSIS.InstallOptions.ini" "Field 2" "State"
!insertmacro MUI_INSTALLOPTIONS_READ $ADD_TO_PATH_ALL_USERS
"NSIS.InstallOptions.ini" "Field 3" "State"
!insertmacro MUI_INSTALLOPTIONS_READ $ADD_TO_PATH_CURRENT_USER
"NSIS.InstallOptions.ini" "Field 4" "State"
; Write special uninstall registry entries
Push "StartMenu"
Push "$STARTMENU_FOLDER"
Call ConditionalAddToRegisty
Push "DoNotAddToPath"
Push "$DO_NOT_ADD_TO_PATH"
Call ConditionalAddToRegisty
Push "AddToPathAllUsers"
Push "$ADD_TO_PATH_ALL_USERS"
Call ConditionalAddToRegisty
Push "AddToPathCurrentUser"
Push "$ADD_TO_PATH_CURRENT_USER"
Call ConditionalAddToRegisty
Push "InstallToDesktop"
Push "$INSTALL_DESKTOP"
Call ConditionalAddToRegisty
!insertmacro MUI_STARTMENU_WRITE_END
@CPACK_NSIS_EXTRA_INSTALL_COMMANDS@
SectionEnd
Section "-Add to path"
Push $INSTDIR\bin
StrCmp "@CPACK_NSIS_MODIFY_PATH@" "ON" 0 doNotAddToPath
StrCmp $DO_NOT_ADD_TO_PATH "1" doNotAddToPath 0
Call AddToPath
doNotAddToPath:
SectionEnd
;--------------------------------
; Create custom pages
Function InstallOptionsPage
!insertmacro MUI_HEADER_TEXT "Install Options" "Choose options for installing
@CPACK_NSIS_PACKAGE_NAME@"
!insertmacro MUI_INSTALLOPTIONS_DISPLAY "NSIS.InstallOptions.ini"
FunctionEnd
;--------------------------------
; determine admin versus local install
Function un.onInit
ClearErrors
UserInfo::GetName
IfErrors noLM
Pop $0
UserInfo::GetAccountType
Pop $1
StrCmp $1 "Admin" 0 +3
SetShellVarContext all
;MessageBox MB_OK 'User "$0" is in the Admin group'
Goto done
StrCmp $1 "Power" 0 +3
SetShellVarContext all
;MessageBox MB_OK 'User "$0" is in the Power Users group'
Goto done
noLM:
;Get installation folder from registry if available
done:
FunctionEnd
;--- Add/Remove callback functions: ---
!macro SectionList MacroName
;This macro used to perform operation on multiple sections.
;List all of your components in following manner here.
@CPACK_NSIS_COMPONENT_SECTION_LIST@
!macroend
Section -FinishComponents
;Removes unselected components and writes component status to registry
!insertmacro SectionList "FinishSection"
!ifdef CPACK_NSIS_ADD_REMOVE
; Get the name of the installer executable
System::Call 'kernel32::GetModuleFileNameA(i 0, t .R0, i 1024) i r1'
StrCpy $R3 $R0
; Strip off the last 13 characters, to see if we have AddRemove.exe
StrLen $R1 $R0
IntOp $R1 $R0 - 13
StrCpy $R2 $R0 13 $R1
StrCmp $R2 "AddRemove.exe" addremove_installed
; We're not running AddRemove.exe, so install it
CopyFiles $R3 $INSTDIR\AddRemove.exe
addremove_installed:
!endif
SectionEnd
;--- End of Add/Remove callback functions ---
;--------------------------------
; Component dependencies
Function .onSelChange
!insertmacro SectionList MaybeSelectionChanged
FunctionEnd
;--------------------------------
;Uninstaller Section
Section "Uninstall"
ReadRegStr $START_MENU SHCTX \
"Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@"
"StartMenu"
;MessageBox MB_OK "Start menu is in: $START_MENU"
ReadRegStr $DO_NOT_ADD_TO_PATH SHCTX \
"Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@"
"DoNotAddToPath"
ReadRegStr $ADD_TO_PATH_ALL_USERS SHCTX \
"Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@"
"AddToPathAllUsers"
ReadRegStr $ADD_TO_PATH_CURRENT_USER SHCTX \
"Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@"
"AddToPathCurrentUser"
;MessageBox MB_OK "Add to path: $DO_NOT_ADD_TO_PATH all users:
$ADD_TO_PATH_ALL_USERS"
ReadRegStr $INSTALL_DESKTOP SHCTX \
"Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@"
"InstallToDesktop"
;MessageBox MB_OK "Install to desktop: $INSTALL_DESKTOP "
@CPACK_NSIS_EXTRA_UNINSTALL_COMMANDS@
;Remove files we installed.
;Keep the list of directories here in sync with the File commands above.
@CPACK_NSIS_DELETE_FILES@
@CPACK_NSIS_DELETE_DIRECTORIES@
!ifdef CPACK_NSIS_ADD_REMOVE
;Remove the add/remove program
Delete "$INSTDIR\AddRemove.exe"
!endif
;Remove the uninstaller itself.
Delete "$INSTDIR\Uninstall.exe"
DeleteRegKey SHCTX
"Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@"
;Remove the installation directory if it is empty.
RMDir "$INSTDIR"
; Remove the registry entries.
DeleteRegKey SHCTX
"Software\@CPACK_PACKAGE_VENDOR@\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@"
; Removes all optional components
!insertmacro SectionList "RemoveSection"
!insertmacro MUI_STARTMENU_GETFOLDER Application $MUI_TEMP
Delete "$SMPROGRAMS\$MUI_TEMP\Uninstall.lnk"
@CPACK_NSIS_DELETE_ICONS@
@CPACK_NSIS_DELETE_ICONS_EXTRA@
;Delete empty start menu parent diretories
StrCpy $MUI_TEMP "$SMPROGRAMS\$MUI_TEMP"
startMenuDeleteLoop:
ClearErrors
RMDir $MUI_TEMP
GetFullPathName $MUI_TEMP "$MUI_TEMP\.."
IfErrors startMenuDeleteLoopDone
StrCmp "$MUI_TEMP" "$SMPROGRAMS" startMenuDeleteLoopDone startMenuDeleteLoop
startMenuDeleteLoopDone:
; If the user changed the shortcut, then untinstall may not work. This should
; try to fix it.
StrCpy $MUI_TEMP "$START_MENU"
Delete "$SMPROGRAMS\$MUI_TEMP\Uninstall.lnk"
@CPACK_NSIS_DELETE_ICONS_EXTRA@
;Delete empty start menu parent diretories
StrCpy $MUI_TEMP "$SMPROGRAMS\$MUI_TEMP"
secondStartMenuDeleteLoop:
ClearErrors
RMDir $MUI_TEMP
GetFullPathName $MUI_TEMP "$MUI_TEMP\.."
IfErrors secondStartMenuDeleteLoopDone
StrCmp "$MUI_TEMP" "$SMPROGRAMS" secondStartMenuDeleteLoopDone
secondStartMenuDeleteLoop
secondStartMenuDeleteLoopDone:
DeleteRegKey /ifempty SHCTX
"Software\@CPACK_PACKAGE_VENDOR@\@CPACK_PACKAGE_INSTALL_REGISTRY_KEY@"
Push $INSTDIR\bin
StrCmp $DO_NOT_ADD_TO_PATH_ "1" doNotRemoveFromPath 0
Call un.RemoveFromPath
doNotRemoveFromPath:
SectionEnd
;--------------------------------
; determine admin versus local install
; Is install for "AllUsers" or "JustMe"?
; Default to "JustMe" - set to "AllUsers" if admin or on Win9x
; This function is used for the very first "custom page" of the installer.
; This custom page does not show up visibly, but it executes prior to the
; first visible page and sets up $INSTDIR properly...
; Choose different default installation folder based on SV_ALLUSERS...
; "Program Files" for AllUsers, "My Documents" for JustMe...
Function .onInit
StrCmp "@CPACK_NSIS_ENABLE_UNINSTALL_BEFORE_INSTALL@" "ON" 0 inst
ReadRegStr $0 HKLM
"Software\Microsoft\Windows\CurrentVersion\Uninstall\@CPACK_PACKAGE_NAME@"
"UninstallString"
StrCmp $0 "" inst
MessageBox MB_YESNOCANCEL|MB_ICONEXCLAMATION \
"@CPACK_NSIS_PACKAGE_NAME@ is already installed. $\n$\nDo you want to
uninstall the old version before installing the new one?" \
IDYES uninst IDNO inst
Abort
;Run the uninstaller
uninst:
ClearErrors
ExecWait '$0 _?=$INSTDIR' ;Do not copy the uninstaller to a temp file
IfErrors uninst_failed inst
uninst_failed:
MessageBox MB_OK|MB_ICONSTOP "Uninstall failed."
Abort
inst:
; Reads components status for registry
!insertmacro SectionList "InitSection"
; check to see if /D has been used to change
; the install directory by comparing it to the
; install directory that is expected to be the
; default
StrCpy $IS_DEFAULT_INSTALLDIR 0
StrCmp "$INSTDIR"
"@CPACK_NSIS_INSTALL_ROOT@\@CPACK_PACKAGE_INSTALL_DIRECTORY@" 0 +2
StrCpy $IS_DEFAULT_INSTALLDIR 1
StrCpy $SV_ALLUSERS "JustMe"
; if default install dir then change the default
; if it is installed for JustMe
StrCmp "$IS_DEFAULT_INSTALLDIR" "1" 0 +2
StrCpy $INSTDIR "$DOCUMENTS\@CPACK_PACKAGE_INSTALL_DIRECTORY@"
ClearErrors
UserInfo::GetName
IfErrors noLM
Pop $0
UserInfo::GetAccountType
Pop $1
StrCmp $1 "Admin" 0 +4
SetShellVarContext all
;MessageBox MB_OK 'User "$0" is in the Admin group'
StrCpy $SV_ALLUSERS "AllUsers"
Goto done
StrCmp $1 "Power" 0 +4
SetShellVarContext all
;MessageBox MB_OK 'User "$0" is in the Power Users group'
StrCpy $SV_ALLUSERS "AllUsers"
Goto done
noLM:
StrCpy $SV_ALLUSERS "AllUsers"
;Get installation folder from registry if available
done:
StrCmp $SV_ALLUSERS "AllUsers" 0 +3
StrCmp "$IS_DEFAULT_INSTALLDIR" "1" 0 +2
StrCpy $INSTDIR
"@CPACK_NSIS_INSTALL_ROOT@\@CPACK_PACKAGE_INSTALL_DIRECTORY@"
StrCmp "@CPACK_NSIS_MODIFY_PATH@" "ON" 0 noOptionsPage
!insertmacro MUI_INSTALLOPTIONS_EXTRACT "NSIS.InstallOptions.ini"
noOptionsPage:
FunctionEnd
--
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the CMake FAQ at:
http://www.cmake.org/Wiki/CMake_FAQ
Follow this link to subscribe/unsubscribe:
http://www.cmake.org/mailman/listinfo/cmake
