Fernando Lopez-Lezcano <[EMAIL PROTECTED]> wrote: > I was just suggesting you try it out without the .asoundrc file, not > that you make that your permanent setup (ie: temporarily > remove .asoundrc, use snd with plughw:1 and see what happens - I don't > really expect changes but you never know).
Yes, of course, sorry. I disabled my ~/.asoundrc by renaming it to ~/.asoundrc(disabled) and called snd with the following command: $ SNDLIB_ALSA_DEVICE="plughw:1" /usr/bin/snd & It launches OK but when I try to play the wav file (which incidentally is quite large, I don't know if this has any bearing on things) I received the following errors: [12:30:38] alsa_audio_open: plughw:1: could not set rate to exactly 44100, set to 0 instead [12:30:38] alsa_dump_configuration: status of plughw:1 hw_params status of plughw:1 ACCESS: RW_INTERLEAVED FORMAT: S16_LE SUBFORMAT: STD SAMPLE_BITS: 16 FRAME_BITS: 32 CHANNELS: 2 RATE: (44101 44102) PERIOD_TIME: [1000 23219) PERIOD_SIZE: 1024 PERIOD_BYTES: 4096 PERIODS: 3 BUFFER_TIME: [3000 69659) BUFFER_SIZE: 3072 BUFFER_BYTES: 12288 TICK_TIME: 1000 sw_params status of plughw:1 start_mode: DATA xrun_mode: STOP tstamp_mode: NONE period_step: 0 sleep_min: 0 avail_min: 0 xfer_align: 0 silence_threshold: 0 silence_size: 0 boundary: 0 [12:30:38] alsa_audio_open: cannot set hardware parameters for plughw:1 [12:30:38] can't play : alsa_audio_open: cannot set hardware parameters for plughw:1 [12:30:38] can't play : alsa_audio_open: cannot set hardware parameters for plughw:1 sdt _______________________________________________ Cmdist mailing list [email protected] http://ccrma-mail.stanford.edu/mailman/listinfo/cmdist
