That's the ticket...sorry a little rusty after 5+ years w/o VM.
Thanks,
Frank M. Ramaekers Jr.
Systems Programmer MCP, MCP+I, MCSE & RHCE
American Income Life Insurance Co. Phone: (254)761-6649
1200 Wooded Acres Dr. Fax: (254)741-5777
Waco, Texas 76710
-----Original Message-----
From: CMSTSO Pipelines Discussion List
[mailto:[email protected]] On Behalf Of Michael Harding
Sent: Thursday, October 15, 2009 5:16 PM
To: [email protected]
Subject: Re: [CMS-PIPELINES] STARMSG and CP SEND
You don't say, but I'm guessing you first establish yourself as secuser
for
EREP. While the HCP150A is sent to the secuser on behalf of the target,
it
isn't SCIF output since it isn't sent to the target's console. Have you
tried also setting CPCONIO to IUCV?
--
Mike Harding
z/VM System Support
[email protected]
[email protected]
[email protected]
(925) 926-3179 (w)
(925) 457-9183 (c)
IM: VMBearDad (AIM), mbhcpcvt (Y!)
CMSTSO Pipelines Discussion List <[email protected]> wrote on
10/15/2009 02:04:57 PM:
> From: "Frank M. Ramaekers" <[email protected]>
> To: [email protected]
> Date: 10/15/2009 02:05 PM
> Subject: STARMSG and CP SEND
> Sent by: CMSTSO Pipelines Discussion List
<[email protected]>
>
> I'm trying to capture the HCP150A message to see if the user issued a
VM
> read or a CP read. I'm using this to END EREP and run reports (on
> another virtual machine after archiving).
>
> My normal process fails when a #CP EXT cause the prompt, but a CP
READ:
>
>
> HCPRET8067A ENTER END OR SUMMARY
> HCPCMD001E Unknown CP command: END
> HCPCMD001E Unknown CP command: EXEC
> HCPCMD001E Unknown CP command: PROFILE
> CONNECT= 39:33:06 VIRTCPU= 000:00.34 TOTCPU= 000:00.52
> LOGOFF AT 00:16:00 CDT THURSDAY 10/15/09 BY SYSTEM
>
> This seems to fail every once in a while.
>
> So, experimenting (assume I have done all the SET xMSG IUCV":
>
> "PIPE (endchar ?)",
> " STARMSG *MSG",
> "| CONSOLE",
> "| ZONE 1-8 FIND 00000008"||,
> "| ZONE 9-16 FIND EREP____"||,
> "| LOCATE /HCPQCS150A/",
> "| PIPESTOP",
> "?",
> " CP SEND EREP #CP EXT",
> "| CONSOLE",
> "?",
> " LITERAL +1:00 WAIT TIME ELAPSED",
> "| DELAY",
> "| CONSOLE",
> "| PIPESTOP"
>
> When I run it, I get:
>
> starmsg
> HCPQCS150A User EREP has issued a VM read
> 00000008EREP EREP : HCPRET8067A ENTER END OR SUMMARY
> +1:00 WAIT TIME ELAPSED
> Ready; T=0.01/0.01 15:50:27
>
> I tried *MSGALL, but got into a loop because the STARMSG trapped the
> CONSOLE stage.
>
> Frank M. Ramaekers Jr.
> Systems Programmer MCP, MCP+I, MCSE & RHCE
> American Income Life Insurance Co. Phone: (254)761-6649
> 1200 Wooded Acres Dr. Fax: (254)741-5777
> Waco, Texas 76710
>
>
>
>
>
>
> _____________________________________________________
>
> This message contains information which is privileged and
> confidential and is solely for the use of the
>
> intended recipient. If you are not the intended recipient, be aware
> that any review, disclosure,
>
> copying, distribution, or use of the contents of this message is
> strictly prohibited. If you have
>
> received this in error, please destroy it immediately and notify us
> at [email protected].
_____________________________________________________
This message contains information which is privileged and confidential and is
solely for the use of the
intended recipient. If you are not the intended recipient, be aware that any
review, disclosure,
copying, distribution, or use of the contents of this message is strictly
prohibited. If you have
received this in error, please destroy it immediately and notify us at
[email protected].
