I think this is one of those cases where specs requires that a string be delimited specifically with double quotes.
-- Mike Harding z/VM System Support [email protected] [email protected] (925) 926-3179 (w) (925) 323-2070 (c) /sp CMSTSO Pipelines Discussion List <[email protected]> wrote on 04/24/2014 01:40:29 PM: > From: "Frank M. Ramaekers" <[email protected]> > To: [email protected] > Date: 04/24/2014 01:41 PM > Subject: Re: SPEC with multiple IFs. > Sent by: CMSTSO Pipelines Discussion List <[email protected]> > > After correcting the missing comma and using ELSEIF, it ends with a cryptic: > > > > "| SPEC /UAGLOBE/ 1.8 1-* NW RECNO FROM" X2D(F800) "D2X NW.4 > RIGHT a: 6.3 .", > > "IF a==/MOD/ THEN", > > "/C/ NW", > > "ELSEIF a==/MVS/ THEN", > > "/C/ NW", > > "ELSE", > > "/R/ NW", > > "ENDIF", > > PIPYAC1434E Parse error in state 137, unexpected O_MULT at offset 3: > "/MOD/ THEN /C/ NW ELSEIF a==/MVS/ THEN /C/ NW ELSE /R/ NW ENDI > > F". > > PIPMSG003I ... Issued from stage 2 of pipeline 11. > > PIPMSG001I ... Running "SPEC /UAGLOBE/ 1.8 1-* NW RECNO FROM 63488 > D2X NW.". > > PIPYAC1435I Expecting T_IDLETTER T_NUMBER T_QSTRING T_IDENT > T_ID_CHAR T_CTR T_DOT T_DOTDOT T_CTRARRAY S_LP O_PLUS O_NOT F_FIRST F_EO > > F F_BREAK F_C2D F_C2F F_X2D F_X2F F_STRING F_AVERAGE F_VARIANCE > F_NUMBER F_EXACT F_SQRT F_STDDEV F_STDERRMEA > > PIPSPE192I ... Scan at position 69; previous data "OM 63488 D2X NW.4 > RIGHT a: 6.3 . IF a==/". > > > > Frank M. Ramaekers Jr. > > > > > > > -----Original Message----- > > > From: CMSTSO Pipelines Discussion List [mailto:CMS- > > > [email protected]] On Behalf Of Kris Buelens > > > Sent: Thursday, April 24, 2014 3:24 PM > > > To: [email protected] > > > Subject: Re: [CMS-PIPELINES] SPEC with multiple IFs. > > > > > > I don't know if that will help: PIPE alos has ean ELSEIF > > > > > > "ELSEIF a==/MVS/ THEN", > > > "/C/ NW", > > > > > > > > > Kris Buelens, > > > --- freelance z/VM consultant, Belgium --- > > > ----------------------------------------------------------------------- > > > > > > > > > 2014-04-24 22:19 GMT+02:00 Joe Parker <[email protected] < > mailto:[email protected]> >: > > > > > > > Well, it's been quite a few years since I wrote any pipe code, but.... > > > > could it be there's a comma missing in the first line? > > > > > > > > > Date: Thu, 24 Apr 2014 15:13:22 -0500 > > > > > From: [email protected] <mailto:[email protected]> > > > > > Subject: SPEC with multiple IFs. > > > > > To: [email protected] <mailto:[email protected]> > > > > > > > > > > I can't seem to find information on what could be wrong with this: > > > > > > > > > > > > > > > > > > > > "| SPEC /xxxx/ 1.8 1-* NW RECNO FROM" X2D(F800) "D2X NW.4 RIGHT a: > > > > > 6.3 ." > > > > > > > > > > "IF a==/MOD/ THEN", > > > > > > > > > > "/C/ NW", > > > > > > > > > > "ELSE", > > > > > > > > > > "IF a==/MVS/ THEN", > > > > > > > > > > "/C/ NW", > > > > > > > > > > "ELSE", > > > > > > > > > > "/R/ NW", > > > > > > > > > > "ENDIF", > > > > > > > > > > "ENDIF", > > > > > > > > > > > > > > > > > > > > I'm not getting the output I expect (I don't see PIPE flagging > > > > > anything). I've only had single IF's in the past. > > > > > > > > > > > > > > > > > > > > Frank M. Ramaekers Jr. | Systems Programmer | Information Technology > > > > > | American Income Life Insurance Company | 254-761-6649 > > > > > > > > > > > > > > > > > > >
