Hi All, I am processing an array in a pipeline. Part of the array contains a bit value. In a regular specs stage I would specify “xx.1 C2B nw” to print the bit value of the input. However in the array the location of the value is to be calculated during array processing.
So to obtain the value I have: set #10:=substr(z,#2+(#0*#3)+1,#3) set #13:=c2x(substr(#10,5,1)) set #14:=c2x(substr(#10,6,1)) where #10 is the record in the array and #13 and #14 are the bit values. I can convert the value into a hex value with C2X but I can’t use C2B to convert it directly into a bit value. I now have a second specs stage to print the word with a X2B conversion, but is there a way to print the bit value directly within the first specs stage? Met vriendelijke groet/With kind regards/Mit freundlichen Grüßen, Berry van Sleeuwen Flight Forum 3000 5657 EW Eindhoven This e-mail and the documents attached are confidential and intended solely for the addressee; it may also be privileged. If you receive this e-mail in error, please notify the sender immediately and destroy it. As its integrity cannot be secured on the Internet, Atos’ liability cannot be triggered for the message content. Although the sender endeavours to maintain a computer virus-free network, the sender does not warrant that this transmission is virus-free and will not be liable for any damages resulting from any virus transmitted. On all offers and agreements under which Atos Nederland B.V. supplies goods and/or services of whatever nature, the Terms of Delivery from Atos Nederland B.V. exclusively apply. The Terms of Delivery shall be promptly submitted to you on your request.
