Jonathan, The pipe and fittings are polybutylene which was used extensively between the 70's and mid 90's. I have it on my boat and have had some trouble finding replacement fittings when I re-plumbed the water heater. There are some websites which still carry these products, but it's being replaced with pex which, as Jake says, is much easier to work with.
Monty Schumpert Scandia 1991 C&C 34/36+ On Jul 29, 2012, at 1:21 PM, Indigo wrote: > I am not sure if the fresh water system on Indigo is original - it consists > of grey, hard plastic (PVC?) piping and similar colored compression fittings. > I am trying to locate spare parts - specifically a compression fitting to > connect the cold water supply (pressure side) to the faucet in the head. Can > anyone recognize this system from my description and tell me the brand name > and / or where I might find spare parts? > > -- > Jonathan > Indigo - Southport CT > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > [email protected] _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
