We replaced the linelines on Prime Interest with some Suncor Quick Attach system kits plus some additional fittings. All 316 stainless - we chose the un-coated line. Took a better part of an afternoon to finish off the project which included 3 gates. Defender.com had ( and still does ) good pricing on the kits.
Other option could be C.S. Johnson fittings ... with Amsteel for no swaging. thanks ed vanderkruk s/v Prime Interest 1982 C&C 38 Landfall Toronto, Canada LF 38, S/N: 229 [email protected] www.primeinterest.blogspot.com -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Alex Giannelia Sent: Monday, September 24, 2012 12:39 PM To: [email protected] Subject: Stus-List Lifelines and Stanchions Hello All. My deck project has evolved enough so that I can contemplate re-installing the stanchions and lifelines. I want to use uncoated stainless wire, so the obvious question is, do I need to worry about chafing on the stanchion itself, as the wire would have the same hardness. Are there soft sacrificial inserts such as nylon, polyethelene, etc, or do I need to manufacture something? Also, 304 or 316 for the wire? Finally, terminal hardware? Any suggestions? Would prefer to use something swageless... Thanks to all in advance... ALEX GIANNELIA CC 35-II (1974) WILL BE RENAMED ON THE HARD SINCE NOV. 2006 Toronto Ontario _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
<<image001.jpg>>
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
