Works for me. I guess...:) Rich Knowles Indigo. LF38 Halifax
On 2012-12-20, at 11:02, Jim Watts <[email protected]> wrote: That's the way it faced in the slip, within a few degrees. Really. Pat, in regards to the portside bilge, I made a full gasket out of silicone that stopped water getting in there. I know all about the problem, that's where I had to scarf in new ply underneath the teak & holly. I figured keeping it dry was better than keeping it drained. On 20 December 2012 06:01, Rich C&C <[email protected]> wrote: > Great pics as usual, Jim and excellent floor job. I’m interested that you > refer to the bow of the boat as south and the stern as north…..?? > > > > Rich Knowles > > INDIGO - LF38 > > Halifax, NS > > > > > > > > From: CnC-List [mailto:[email protected]] On Behalf Of Jim Watts > Sent: December 19, 2012 19:02 > To: [email protected] > Subject: Re: Stus-List Season is over > > > > Here's a piece I put together a long time ago when I did the project on my > last boat. http://members.shaw.ca/paradigmshift/floorboards.html > > > > -- > Jim Watts > Paradigm Shift > C&C 35 Mk III > Victoria, BC > > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > [email protected] -- Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
