Joel, I checked again and here is what I have: West System 105 - Epoxy Resin (Part 1) Have about 3/4 of the quart can West System 206 - Hardener (Part 2) Have about half the pint can West System 216 - Special thinner (prep) Have about 2/3 quart can
I'm not doing much this coming week. I'll probably work a few hours tomorrow morning. and will work some off and on Wed - Fri. Pat On Sun, Dec 23, 2012 at 9:48 AM, Joel Aronson <[email protected]>wrote: > Pat, > > It looks like the epoxy is the way to go on the edges and bottom of the > plywood. I'll take that 105 off your hands. Let me know when it would be > convenient to get together for a beer. > > > Joel > Sent from my iPad > > On Dec 22, 2012, at 5:21 PM, Pat Nevitt <[email protected]> wrote: > > Joel, > > Not what I used on the boards, but I have a whole can of West 105 that is > yours if you want it. I used just a small amount when I drilled and filled > the holes for my new rope clutches. > > Pat > > On Sat, Dec 22, 2012 at 5:17 PM, Pat Nevitt <[email protected]> wrote: > >> Joel, >> >> I used epoxy on mine. Did you ever look at the underside of the bilge >> cover on my boat? It's all epoxy. >> >> Pat >> >> >> On Sat, Dec 22, 2012 at 5:04 PM, Joel Aronson <[email protected]>wrote: >> >>> Well I took up a couple pieces of the cabin sole, and the underside >>> needs to be re-sealed. Some areas look like they have been damp for a >>> while, but they are not delaminated or spongy. >>> Can I use a marine primer or do I need to spend on West System stuff? >>> >>> Joel >>> Sent from my iPad >>> >>> _______________________________________________ >>> This List is provided by the C&C Photo Album >>> http://www.cncphotoalbum.com >>> [email protected] >>> >> >> > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > [email protected] > > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > [email protected] > >
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
