Sounds like you're close. Mine is external to the boom but runs to a block on
a padeye on the aft side of the mast then to a stand up block on the deck then
to a Spinlock PowerCleat by the companionway. Functionally the same set up as
you describe.
Dennis C.
Touche' 35-1 #83
Mandeville, LA
>________________________________
> From: Joel Aronson <joel.aron...@gmail.com>
>To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com>
>Sent: Saturday, December 29, 2012 12:25 PM
>Subject: Stus-List Outhaul
>
>
>While my teak is bleaching in the garage, I need some advice on my outhaul.
>
>
>It currently runs to the front of the boom through 2 sheaves back into the
>boom and exits the bottom of the boom between the vang and mainsheet where
>there is a cam cleat. When I replace my clutches I could run it to the base
>of the mast, through the new line organizer to the clutch.
>
>
>It is the original wire and rope line. I plan to replace it with 3/8 StaySet.
>
>
>Suggestions?
>
>
>--
>Joel
>301 541 8551
>_______________________________________________
>This List is provided by the C&C Photo Album
>http://www.cncphotoalbum.com
>CnC-List@cnc-list.com
>
>
>
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
