SAM
What exactly did you get for your $60.00?
I would be very interested in building myself a half hull model if there was a lines drawing included .
Sans Souci II C&C 26
David

On 06/01/2013 3:37 PM, Sam Salter wrote:
Contact the curator:
cura...@marmuseum.ca <mailto:cura...@marmuseum.ca>
I've forgotten his name, but great to deal with.
Plans for my 26 cost about $60 if I remember correctly.
sam
C&C 26  Liquorice
Ghost Lake  Alberta

On 2013-01-06, at 1:13 PM, honeys...@aol.com <mailto:honeys...@aol.com> wrote:

Hello
I would love to have the drawing for my 1974 C&C 39, please advise how do I go about purchasing the lines from the museum or who do I reach out to and how? I bought the original builder's file from Rod Ball a few years ago and having the plans would make my boat file complete. Thanks for any advice that you may offer
Brgds
Jack Fitzgerald ('74 C&C 39 TM)
HONEY
US127688
Savannah, GA
In a message dated 1/6/2013 11:51:00 A.M. Eastern Standard Time, paradigmat...@gmail.com <mailto:paradigmat...@gmail.com> writes:

    When you are done with them, it would be nice if you could donate
    them to the Maritime Museum of the Great Lakes in Kingston. They
    have the archive of all the C&C plans; several of us have bought
    scans of our designs from them.


    On 6 January 2013 08:10, Bob Hickson <bobhick...@rogers.com
    <mailto:bobhick...@rogers.com>> wrote:

        I have had the original C & C blueprints for the 29 mark 2
        keel scanned.

        I also have a sketch of the keel bolt sizes and locations

        If you would like to have the scanned PDF files, please send
        me an email (bobhick...@rogers.com
        <mailto:bobhick...@rogers.com>) and I will forward it to you

        I have also located drawings for the following boats;

        ØC & C 39 custom (NE39) circa 1984

        ØC & C 62 custom (Jorge Altamirano) circa 1981

        ØC & C 52 custom circa 1983

        ØC & C 67 custom (Kingston Boat) circa 1979

        ØC & C 35 & 36 centreboard keel (same keel but 35 had a
        fiberglass spacer between the keel & hull) circa 1983....
        this also includes drawings of the centreboard and all
        lifting hardware

        ØC & C 36 centreboard circa 1976

        ØC & C "Evergreen" circa 1977 -- Canada Cup challenger

        ØC & C 40 bolt on keel shoe for tall rig circa 1980

        None of these drawings have been scanned to PDF so send a
        separate email if you would like any of these drawings

        I will look through more of the old files and provide another
        list in the future

        Best regards,

        *Bob Hickson, P. Eng, RHI, CEA*

        */C&C 29-2 Flying Colours/*

        *(416) 919-2297 <tel:%28416%29%20919-2297>*

        *bobhick...@rogers.com <mailto:bobhick...@rogers.com>*

        **

        ~~~~ __/) ~~~~


        _______________________________________________
        This List is provided by the C&C Photo Album
        http://www.cncphotoalbum.com <http://www.cncphotoalbum.com/>
        CnC-List@cnc-list.com <mailto:CnC-List@cnc-list.com>




-- Jim Watts
    Paradigm Shift
    C&C 35 Mk III
    Victoria, BC


    _______________________________________________
    This List is provided by the C&C Photo Album
    http://www.cncphotoalbum.com
    CnC-List@cnc-list.com <mailto:CnC-List@cnc-list.com>

_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com <mailto:CnC-List@cnc-list.com>


_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

--
D.Drake 73 Jensen Healey C&C 26
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Reply via email to