Once you figure out the cross section and part number of the spline you need, you will find it readily available and pretty reasonable. A couple of years ago, I thought about buying a 100 ft roll on Ebay at a cost of about $20. I may just do that the next time I need to reseal the 6 portlights on my 2 boats.
Rick Brass Washington, NC -----Original Message----- From: CnC-List [mailto:[email protected]] On Behalf Of Bill Connon Sent: Thursday, February 07, 2013 5:18 PM To: [email protected] Subject: Re: Stus-List Old style aluminum frame portlight gasket David Paine wrote: > Ron, > > Not cheap is right! 4 windows * 5 ft of spline/window * $4.00/ft > = $80.00 (approx) I'll probably have to bite the bullet but here's > hoping someone has found a reasonable alternative. > > David > > > David Holland Marine has the spline at $21.47 for a 37 foot roll. I did my windows many years ago with spline from South Shore and paid a lot more than that. Live and learn. http://www.hollandmarine.com/index.html Bill Caprice 1 1978 C&C 36 _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected] _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
