I use the same shut down procedure (suggested by Max prop) and leave the
transmission in reverse.
Jack Fitzgerald
C&C 39TM
HONEY
US12788
In a message dated 3/26/2013 2:02:59 P.M. Eastern Daylight Time,
[email protected] writes:
How do you feather a max-prop?
A friend of mine says he:
1. While motoring forward at 3 knots, shuts off the motor
2. Places the transmission into reverse to feather the prop
That’s it, that’s what he does. He leaves the transmission in reverse.
I do the following:
1. While motoring forward at 3 knots, shut off the motor
2. Place the transmission into reverse for 20 seconds to feather the
prop
3. Place the transmission in neutral
According to my friend, leaving the transmission in reverse keeps the prop
feathered and keeps the driveshaft from rotating.
Any thoughts on this??
Terry Johnson
S/V Ozymandias
E-mail: [email protected]
Website: www.tj622.com
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
[email protected]
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
[email protected]
