Steve:
I have a Yanmar 2GMF....replaced both belts...Yanmar dealer had them but
about 30% more than at the NAPA store here....just took the 2 old belts
to NAPA and they matched them up......and I am confident the NAPA
alternator belt was superior, and probably the RW pump as well. Just in
case you get the right part #.......FYI
Bob Abbott
AZURA
C&C 32 - 84
Halifax, N.S.
On 2013/04/22 2:27 PM, sam.c.sal...@gmail.com wrote:
Take the old belt to Canadian Tire or NAPA or Auto Value. V belts are
pretty standard stuff, I'm sure they'll be able to match it.
Sam :-)
sam :-) 403-617-6280
*From: *OldSteveH
*Sent: *Monday, April 22, 2013 10:08 AM
*To: *cnc-list@cnc-list.com
*Reply To: *cnc-list@cnc-list.com
*Subject: *Stus-List Yanmar 3GM30F Belts
Hello all, I went to a local industrial equipment vendor last year to buy
some parts for my 3GM30F engine. They're a Yanmar dealer albeit for
industrial engines, and they quoted very reasonable prices, and are also
right here in town as opposed to driving to Toronto.
Between us we got most of the part numbers right except for the alternator
belt.
Here is the part number I ordered and found is too small: 25112-003601
The raw water pump belt was ok though.
Can anyone offer a part # for the alternator belt? The one negative about
the industrial dealer is they will order whatever you tell them but they
don't know the engine configuration and so cannot advise whether it's the
right part.
Thanks,
Steve Hood
S/V Diamond Girl
C&C 34
Lions Head ON
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
