But the food replicator is stuck on “water, 8-oz, chilled” .... I’m shopping for one as well. My boat didn’t come with an electric bilge pump and I just rebuilt my manual one, after it gave up the ghost.
Most everyone around here carries the Rule lineup. At 3/4 inch connection I think you’re limited to about 800 gph or less, unless you reduce at the pump outlet, and I don’t see any benefit in doing that. Peter Fell Sidney, BC C&C 27 MkIII ... soon to be renamed From: Edd Schillay Sent: Sunday, July 28, 2013 10:04 AM To: [email protected] Subject: Stus-List Bilge Pumps Listers, Looks like one of my Rule bilge pumps just burnt out and I'm shopping for a replacement. My hoses are 3/4". Between the many manufacturers out there (Rule, Attwood, Johnson, Jabsco, etc.), does anyone have any recommendations of any particular manufacturer or model? Otherwise, it's eenie, meenie, miney, moh. . . And before the Trek jokes start, no, we have not yet been able to configure the transporter correctly to just beam the water off the boat. All the best, Edd ------------------------------- Edd M. Schillay Starship Enterprise NCC-1701-B C&C 37+ | City Island, NY www.StarshipSailing.com ------------------------------- 914.332.4400 | Office 914.332.1671 | Fax 914.774.9767 | Mobile ------------------------------- Sent via iPhone 5 -------------------------------------------------------------------------------- _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
