Hi, I would try the thickened G/Flex epoxy from West Systems. It bonds plastic very well. See the G/flex epoxy kayak challenge on youtube:
http://www.youtube.com/watch?v=2a5RlcP-4JE - Paul E. 1979 C&C 29 Mk1 S/V Johanna Rose Carrabelle, FL > > On Aug 2, 2013, at 8:28 AM, [email protected] wrote: > >> Message: 1 >> Date: Thu, 1 Aug 2013 13:26:00 -0300 >> From: Knowles Rich <[email protected]> >> To: "[email protected]" <[email protected]>, >> "[email protected]" <[email protected]> >> Subject: Re: Stus-List Opening port manufacturer >> Message-ID: <[email protected]> >> Content-Type: text/plain; charset=us-ascii >> >> Depending on exactly where it is broken, a plastic supplier can supply an >> acrylic bonding cement that might well repair it easily. >> >> RIch >> >> >> On 2013-08-01, at 12:51, Ken Heaton <[email protected]> wrote: >> >>> The opening port on my 1979 C&C 36 has a broken hatch at the point that is >>> hinged to the fixed part of the port. The port is plastic with the >>> deminsions of 4 7/8" X 15", there are two hinge points that are connected >>> to the fixed part of the port and the outside measurement of them is 9 >>> 1/4". >>> Anyone with a thought of repair or replacement, please advise. >>> I do not believe that it was produced by Atkins Hoyle. >> >
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
