Dennis,
Thanks for the info. Another question: Are you happy
with the Aquasignal? I was deciding between the Forespar ML-2, Hella 8505,
and the AquaSignal Series 25. I decided on the Hella based on some bad
reviews I found online for the other two. The Forespar had reports of top
lens falling out while tacking and the AquaSignal was stated as not having any
spray protection for the deck light bulb and so bulbs corroded and died
prematurely.
-
Paul E.
1979 C&C 29 Mk1
S/V Johanna Rose
Carrabelle, FL
On Sep 5, 2013, at 10:49 AM, [email protected] wrote:
> Message: 10
> Date: Thu, 5 Sep 2013 07:49:51 -0700 (PDT)
> From: "Dennis C." <[email protected]>
> To: "[email protected]" <[email protected]>
> Subject: Re: Stus-List replacing steaming old light
> Message-ID:
> <[email protected]>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Paul,
>
> If it is like the one on Touche's mast, I abandoned it.? It was that same
> Perko all around light mounted on a metal "donut" welded to the mast.? I
> installed an Aquasignal Series 25 combo steaming/foredeck light a bit above
> the old fixture and dropped new wires.?
>
> I'm guessing the Aquasignal would fit over and hide the existing donut once
> you remove the Perko light if you wanted to mount it in the same spot.? You
> could use the existing wires to pull the new wires.
>
> On a side note, Touche's pole topping lift exited another of those "donut"
> things above the steaming light.? I have also abandoned that and installed an
> exit box with sheave for the topping lift.
>
> Dennis C.
> Touche' 35-1 #83
> Mandeville, LA
>
>
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
[email protected]
