Ed: It should work. Thanks.
Fred From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Ed Levert Sent: Sunday, September 08, 2013 6:57 AM To: cnc-list@cnc-list.com Subject: Re: Stus-List Airmar speed transducers As close as I can measure, it is 1 1/2 in diameter. _____ From: CnC-List on behalf of Terry Sent: Saturday, September 7, 2013 6:19 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List Airmar speed transducers Ed, do you know what the diameter of the transducer is? 1-5/8 or 1- 1/4? Thanks, from Terry on behalf of Fred... From: Ed Levert <mailto:elev...@grayinsco.com> Sent: Saturday, September 07, 2013 3:53 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List Airmar speed transducers Fred: Spent the PM changing fuel filters. Hope the transducer works. I will put it in the mail on Monday. The transducer came from a C&C 30 Mk 1 I bought in 2006. A prior owner had installed the speed and depth transducers with a piece of plywood on the outside of the hull. On the next haulout, the plywood was too spongy. 5200 had been used to seal the installation and the boatyard broke the through hull trying to remove it. So I ended up owning a new transducer and new through hull. The one I am sending was working when last in use. It has the 5 pin plug. If it works, I am happy to get it off my shelf as I have too many boat parts "in stock." I hope it will work for you. Ed _____ From: CnC-List on behalf of Fred Hazzard Sent: Saturday, September 7, 2013 1:36 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List Airmar speed transducers Ed: Great. Thank you very much. My address is: Fred Hazzard 3232 SE Raymond St. Portland, Or 97202 Fred From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Ed Levert Sent: Saturday, September 07, 2013 7:43 AM To: cnc-list@cnc-list.com Subject: Re: Stus-List Airmar speed transducers Fred: I have an Airmar transducer but as near as my eyes can see, it looks to be 1 1/2" in diameter. If you can use it or even want to try, its yours. Send me your mailing address. Ed Levert Briar Patch C&C 34 New Orleans elev...@grayinsco.com _____ From: CnC-List on behalf of Fred Hazzard Sent: Friday, September 6, 2013 11:12 PM To: cnc-list@cnc-list.com Subject: Stus-List Airmar speed transducers I am in need of an Airmar speed transducer. It needs to be the older 800 series that reads boat speed and temp. Further it needs to be an older unit that is 1 5/8" in diameter. Anybody have an older working unit in your surplus boat gear? Fred Hazzard S/V Fury Portland, OR _____ _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com Terry Johnson S/V Ozymandias E-mail: tj...@comcast.net Website: www.tj622.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
