I just went up the port side of the boat (above the shelf) and through the bulkhead behind the ice box. You can tie wrap the cable to the hull/deck bolts which stick down. Once inside the cabin, just go inwards to the ice box area (my radio is mounted just over the aft of the ice box).
Gary 30-1 #593 ----- Original Message ----- From: martin schulman To: [email protected] Sent: Thursday, September 12, 2013 4:38 PM Subject: Stus-List feeding wire between cabin top and inner liner I recently bought a new VHF radio for my 1974 30 Mk I that incorporates a GPS. The old one is located over the ice box. I need to bring a cable from the stern mounted GPS to the new unit but find the power and antenna cables on the old one are brought up between the cabin top and inner liner where there is virtually no clearance to bring a new cable. Has anyone worked this problem through. I would rather not re-locate the VHF. Thanks in advance. Martin ------------------------------------------------------------------------------ _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
